For a Honda Civic, replacing a wheel hub (the hub bearing) typically costs between roughly $250 and $600 per wheel when you factor in parts and labor. The exact price depends on whether the job is at the front or rear hub, the model year, the choice of OEM vs aftermarket parts, and local labor rates.
The hub assembly is pressed onto the axle and can include the wheel speed sensor—often part of the hub unit—so many shops sell the whole hub assembly rather than just the bearing. Costs have fluctuated with parts pricing and inflation over the years. This article outlines current range expectations, what drives price, and tips to save.
What drives the price
Several variables influence the final bill for a hub replacement on a Honda Civic.
- Parts cost: OEM hub assemblies are usually more expensive than aftermarket alternatives. Expect roughly $120–$350 per wheel for OEM and $60–$150 for aftermarket hubs, depending on the trim and ABS integration.
- Labor rate and time: Typical labor times are 1–2 hours per wheel, with shop rates ranging from about $80–$150 per hour depending on location. This can add $80–$300 in labor per wheel.
- Front vs rear hub: Front hub assemblies are generally more costly due to more complex bearings and optional ABS sensor integration; rear hubs are usually cheaper but still similar in process.
- ABS and wheel speed sensor: If the hub includes a sensor, or if the sensor needs replacement, that can add to the price.
- Vehicle model year and design: Some Civics use more integrated hub units or require special procedures; newer or higher-trim models may be priced higher.
- Shop type and location: Dealer-level service is typically pricier than independent shops; urban areas often command higher labor rates.
Prices shown are typical ranges in the United States and may vary by region and shop. Always request a formal written estimate before any replacement.
Typical cost ranges for a Honda Civic hub replacement
Below are typical cost ranges you can expect, separated by front and rear hub work, to help you budget.
Front hub bearing replacement
Front hub work generally costs more due to the bearing and possible ABS sensor integration. Prices combine parts and labor per wheel.
- Parts: OEM hub assemblies typically $120–$350; aftermarket hubs $60–$150.
- Labor: About 1–2 hours at a shop rate of roughly $80–$150/hour, or $80–$300 for labor.
- Typical total per wheel: Approximately $250–$650, depending on parts choice and local rates.
The front hub replacement is the most common Civic hub job and tends to be the cost anchor for this repair.
Rear hub bearing replacement
Rear hub work is commonly slightly less expensive, though prices vary with the same factors as the front.
- Parts: OEM rear hub assemblies typically $60–$230; aftermarket $50–$120.
- Labor: Similar to front, about 1–2 hours; $80–$300 for labor depending on rates.
- Typical total per wheel: Approximately $200–$520.
Rear hub replacements may come up on Civics with wear in the rear bearings or if the vehicle is being updated with maintenance on all wheels.
What to expect at the shop
When you bring a Civic in for hub replacement, expect the shop to inspect the bearing for play, test the ABS sensors, and check the wheel for run-out. Replacing a hub assembly involves removing the axle nut, caliper and rotor as needed, and pressing in a new hub. In most cases, a wheel alignment is not required unless other suspension components were replaced or if the alignment was already off.
Some shops include a tire rotation or brake inspection in the service, and many offer warranties on parts and labor—often 1–2 years. If ABS or speed sensors were damaged or required recalibration, the cost could be higher.
Tips to save on Honda Civic hub replacement costs
Before you proceed, consider obtaining quotes and exploring cost-saving options.
- Get multiple quotes from independent shops and authorized service centers to compare prices.
- Ask for a breakdown of parts vs. labor and request OEM vs. aftermarket options.
- Inquire about bundled services (e.g., alignment or brake inspection included in the price).
- Check for warranties on parts and labor; a longer warranty can offset higher upfront costs.
- Consider replacing only the needed hub if a bearing is still serviceable, though most shops recommend full hub assemblies for reliability and sensor integrity.
Planning ahead and comparing quotes can help you avoid surprises at the checkout.
Summary
Replacing a wheel hub on a Honda Civic typically costs between $250 and $650 per wheel for front hubs and roughly $200 to $520 per wheel for rear hubs, with variations based on OEM vs aftermarket parts, labor rates, and whether the ABS sensor is included. Always obtain a written estimate, confirm whether a wheel alignment is advisable after the work, and consider warranty coverage on parts and labor. Being informed helps Civic owners budget accurately and choose a trusted shop.
How do I know if a Honda Civic wheel hub needs to be replaced?
Signs of a Bad Wheel Hub
- Growling/humming noise. The most common sign of a faulty wheel hub assembly is a rotational growling or humming noise while driving.
- Vibration while driving.
- Pulsation when braking.
- Abnormal tire wear.
- Illuminated warning lights.
How expensive is it to fix a wheel hub?
The average cost for a Wheel Hub Assembly Replacement is between $490 and $657 but can vary from car to car.
How much does it cost to replace a wheel hub assembly on a Honda Civic?
The average cost for a Honda Civic Wheel Hub Assembly Replacement is between $319 and $476 but can vary from car to car.
Can I drive with a bad wheel hub bearing?
If you're wondering what happens when a wheel bearing goes out, or how long you can drive on a bad wheel bearing, the answer is—not long. Continued driving could lead to loss of steering control, brake failure, or wheel lock-up.