In short, the oil capacity depends on the engine: about 4.5 quarts for the 2.4-liter four-cylinder and about 5.7 quarts for the 3.5-liter V6, including the oil filter. Always verify with the owner's manual or under-hood specifications.
The 2014 Accord was offered with two engines, each with a slightly different oil capacity. This article explains those figures and how to apply them when you service the car.
Engine options and oil capacity
The following figures reflect standard oil capacities for the 2014 Accord with the oil filter installed. They apply to typical configurations; always confirm for your specific model using the manual or Honda's official specs.
- 2.4L four-cylinder (i-VTEC) — oil capacity: 4.5 quarts (with filter)
- 3.5L V6 — oil capacity: 5.7 quarts (with filter)
The capacities above cover the most common configurations. If you are unsure which engine your car has, check the door jamb label or your VIN-specific manual. When topping off or performing a full change, use the correct quantity and recheck the level with the dipstick after a short idle and a few minutes of rest.
Practical tips for oil changes
Before you begin, confirm your engine type and use the appropriate specifications. Replace the oil filter during every full change and use fresh oil that meets Honda's recommended specification for your engine. If you are only topping off, add small amounts and recheck the level to avoid overfilling.
Summary
For the 2014 Honda Accord, engine oil capacity is approximately 4.5 quarts for the 2.4L four-cylinder and about 5.7 quarts for the 3.5L V6, with the filter included. Always verify exact capacity using the owner's manual or the under-hood information label, and follow proper change procedures to ensure engine health.