Expect roughly 500 to 900 dollars per wheel for a wheel bearing/hub replacement on a Toyota Tundra in the United States, with front-wheel replacements typically more expensive than rear. Prices vary by year, region, and whether a hub assembly or bearings-only replacement is needed.
Replacing a wheel bearing is a common maintenance item when a vehicle develops a grinding or humming noise, looseness in the wheel, or an ABS warning light. The Toyota Tundra’s front hubs are usually replaced as a complete hub assembly, which can influence the price compared with replacing just the bearings. The following breakdown explains typical ranges and what drives them, along with tips for getting an accurate quote.
Cost breakdown by scenario
Below are typical price ranges you might see in the United States for common replacement scenarios, expressed per wheel. Figures include parts and labor but can vary by shop and location.
- Front wheel bearing hub replacement (per wheel): $350–$800
What’s included: hub assembly replacement, labor, and basic recycling fees. Some shops charge more for ABS tone ring work or if the brake components need extra disassembly.
Concluding note: Front-wheel bearing hub replacements tend to be at the higher end of the range due to the hub assembly containing the wheel speed/ABS components and the typically longer labor time.
- Rear wheel bearing hub replacement (per wheel): $300–$750
What’s included: hub or bearing assembly replacement, labor, and standard shop fees. Rear replacements can be less expensive if the hub is simpler to access, but prices rise if the job requires more disassembly or if an ABS sensor is involved.
Concluding note: Rear replacements are usually a bit cheaper than fronts, but the exact price depends on access, whether the hub is in a drum-to-disc arrangement, and the need for any ABS sensor work.
Other factors that influence price
Several variables can push the final quote higher or lower. Key considerations include the vehicle’s exact model year, whether the hub assembly or just the bearing is being replaced, regional labor rates, and whether a diagnostic fee is charged. Additional costs may arise for:
- ABS sensor work or replacement of the tone ring
- Brake component replacement if inspection reveals wear
- Wheel alignment after replacement
- Rotor or brake pad replacement if they are worn
- Tax, disposal fees, and shop handling charges
Concluding note: If you’re replacing both front wheels or both rear wheels at the same time, some shops offer a per-axle or per-wheel discount, which can reduce total cost compared with two single-wheel replacements.
Getting a reliable quote and what to ask
To ensure you get an accurate price, obtain itemized estimates from shops. Ask these questions:
- Is the price for a hub assembly replacement or bearings-only?
- Does the quote include ABS sensor work, if necessary?
- Are there any required ancillary services (alignment, rotor/brake replacement)?
- Is there a diagnostic fee, and is removal/installation time estimated in hours or flat-rate?
- Will the shop provide a warranty on parts and labor, and what does it cover?
Concluding note: Getting multiple, itemized quotes helps you compare not just price but the scope of work, warranty, and projected turnaround time. Ask for estimates that break out parts, labor, and any shop fees.
Summary
Replacing a wheel bearing or hub on a Toyota Tundra is a mid-to-high range automotive repair that commonly costs per wheel around $350–$800 for front replacements and $300–$750 for rear replacements, depending on hub assembly usage, labor rates, and added services. To avoid surprises, seek detailed, written quotes that specify parts (hub assembly vs bearings), labor hours, potential ABS-related costs, and any follow-up services such as alignments. If in doubt, consider getting a quote from both a dealership and an independent shop to compare pricing and warranty terms.