In the United States, expect roughly $300 to $700 per wheel for a wheel bearing/hub replacement on a Hyundai Veloster, depending on whether the front or rear axle is involved and whether the hub assembly or just the bearing is replaced. Labor rates and parts prices vary by shop and region.
The Veloster uses a modular hub bearing assembly on most front wheels, and rear bearings are addressed differently depending on the model year. Costs will differ whether you replace a single wheel or both sides, and whether you use OEM or aftermarket parts. This article breaks down typical costs and contributing factors to help you budget for this service.
Cost factors that influence the price
Prices fluctuate based on the type of replacement, the axle involved, parts quality, and labor charges. The following factors typically have the biggest impact:
- Parts configuration: front-wheel replacements commonly use a hub assembly; rear-wheel replacements may use a hub or bearing depending on year and trim. This changes part price and installation time.
- Front vs rear axle: front replacements are often more expensive due to additional components and alignment considerations.
- Parts quality: OEM dealer parts are pricier than aftermarket hubs, but some shoppers prefer the warranty and fit of OE parts.
- Labor costs: hourly rates vary by region and shop; some require more labor for wheel bearing removal and hub pressing.
- Additional work: axle nuts, brake components, or wheel alignment might be needed, adding to the total.
Understanding these factors helps you compare quotes and decide whether you need a hub assembly replacement or just a bearing swap, which is less common on modern Velosters.
Typical price ranges for a Hyundai Veloster
Below are typical ranges you might see in U.S. shops for common scenarios. All figures are ballpark estimates for a single wheel and include both parts and labor; actual prices can vary by region and shop.
- Front wheel hub assembly replacement: parts roughly $120–$400; labor around $150–$350; total per wheel often $270–$750.
- Rear wheel bearing or hub replacement: parts roughly $60–$250; labor around $120–$300; total per wheel often $180–$550.
- Both wheels on one axle or both axles: expect the price to double or more, depending on labor time and parts availability.
- Optional wheel alignment after replacement: $60–$100, sometimes included in a package deal.
Shop around for quotes, and ask whether the price includes the axle nut torque, any needed brake rotor or caliper work, and whether a lifetime warranty on the hub is offered by aftermarket suppliers.
What to do next
To get a precise quote for your Veloster, contact local repair shops or Hyundai dealers with your vehicle year and trim, whether the issue is on the front or rear, and whether you want OEM or aftermarket parts. If you’re mechanically inclined, you might compare DIY costs, but hinge areas like hub pressing require proper tools and torque specs to avoid safety issues.
Remember to verify whether a wheel alignment will be needed after replacing the hub, and confirm the warranty terms on parts and labor before proceeding.
Summary
Wheel bearing replacement costs for a Hyundai Veloster generally run from a few hundred to upwards of six hundred dollars per wheel, heavily influenced by whether the front or rear axle is involved, the choice of hub assembly versus bearing-only replacement, and local labor rates. Getting multiple quotes and clarifying what's included is the best way to budget for the service.