Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

How much horsepower does a 2010 GMC 5.3 have?

Approximately 315 horsepower.


In 2010, GMC relied on a 5.3-liter V8—often referred to as the Vortec 5300—for many of its full-size trucks and SUVs. The engine was commonly rated at 315 horsepower, producing about 335 lb-ft of torque. Exact numbers can vary slightly by model configuration, fuel system (gasoline or flex-fuel), and whether features like Active Fuel Management (AFM) are in use, but the standard figure for the 2010 5.3L V8 is 315 hp.


GMC models in 2010 that used the 5.3L V8


The 5.3L V8 powered several GMC vehicles in 2010. The following GMC models used this engine and shared the same general horsepower rating:



  • GMC Sierra 1500 (various cab configurations and trims)

  • GMC Yukon

  • GMC Yukon XL


In these models, the engine’s 315 hp rating applied across most configurations, with torque around 335 lb-ft. Real-world results can vary slightly based on drivetrain setup, exhaust, and fuel strategy.


Engine specifications at a glance


For a concise snapshot, here are the core figures associated with the 2010 5.3L V8:



  • Horsepower: 315 hp at 5,600 rpm

  • Torque: 335 lb-ft at 4,000–4,400 rpm


These values reflect the standard Vortec 5300 configuration used in most 2010 GMC trucks and SUVs. Some trims or markets with AFM or flex-fuel variants can show minor deviations in perceived performance, but the published rating remains 315 hp.


Notes on variations


Active Fuel Management (AFM) and flex-fuel options can influence how the engine behaves in everyday driving, especially under light loads, but do not typically alter the published horsepower figure for the 2010 5.3L V8. For most buyers and enthusiasts, the engine’s headline specification remains 315 hp with about 335 lb-ft of torque.


Summary


The 2010 GMC 5.3-liter V8 delivers about 315 horsepower, paired with roughly 335 lb-ft of torque. It powered popular GMC models such as the Sierra 1500, Yukon, and Yukon XL, offering solid towing and acceleration for the segment. While exact numbers can vary by configuration and equipment, 315 hp is the standard reference point for the 2010 5.3L V8.

Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.