A wheel bearing replacement on a 2007 Honda CR-V typically costs between about $250 and $600 per wheel, depending on whether you replace a full hub assembly or just the bearing, the axle (front vs rear), and the local labor rate. Front-wheel-drive models often require hub assemblies with integrated ABS sensors, which can push the price higher.
In this article, we break down the main cost drivers, typical price ranges, potential add-ons, and practical tips to get accurate estimates from repair shops for a 2007 CR-V. This helps owners understand what to expect and how to shop for a fair deal.
What drives the price
Prices vary based the type of part used, the axle location, the quality of components, and the regional labor market. The following factors commonly affect the final bill.
- Part choice: hub assembly with integrated bearing (often including the ABS sensor) versus replacing only the bearing.
- Axle location: front-wheel-drive CR-Vs more frequently use hub assemblies; rear replacements can be cheaper but are not always simple.
- Parts quality and brand: aftermarket parts are typically less expensive than OEM/Dealer parts, with varying longevity.
- Labor rate and time: shop hourly rates vary by region, and the job generally takes around 1.5–2.5 hours front or 1–2 hours rear depending on access and rotor condition.
- Additional services: brake inspection, rotor resurfacing or replacement, and wheel alignment can add to the total.
Conclusion: Understanding these factors helps you compare quotes and choose the best option for your CR-V.
Cost ranges and what to expect for parts and labor
Parts and labor breakdown
Breaking the price into parts and labor gives a clearer picture of where the money goes. The ranges below reflect typical pricing seen in the U.S. in recent years.
- Parts: Front hub assembly with bearing (usually including the ABS sensor) commonly ranges from about $60 to $350 per wheel; aftermarket hubs are cheaper, OEM or dealer parts are on the higher end. Rear hub kits generally run about $50 to $200 per wheel.
- Labor: Front replacements typically require roughly 1.5–2.5 hours; rear replacements about 1–2 hours. With common shop rates of $75–$125 per hour, labor commonly falls in the ballpark of $110–$420 per wheel (higher in expensive markets).
Conclusion: Most single-wheel replacements fall into the roughly $250–$600 range, with front-wheel-drive cars and hub assemblies driving toward the higher end, especially in areas with higher labor rates.
Other charges and considerations
Beyond the bearing itself, several add-ons can affect the final bill. Here are common possibilities and how they influence cost.
- Brake components: rotor resurfacing or replacement and brake pad service can add $100–$300 per axle.
- Wheel alignment: advisable after suspension/removal work; typically $60–$120.
- ABS sensor issues: if the sensor is damaged or needs replacement, expect an additional $50–$150.
- Disposal, shop fees, and taxes: these vary by location and shop policy; confirm whether tax is included in the quoted price.
Conclusion: Get a full written quote that itemizes parts, labor, and any potential extras to avoid surprises.
Tips to get an accurate estimate
To ensure you receive a precise and fair quote for your 2007 CR-V, use these practical steps when requesting estimates.
- Ask for an itemized breakdown: parts, labor hours, hourly rate, and any disposal or shop fees should be listed separately.
- Specify parts preference: request OEM, OEM-equivalent, or aftermarket parts and whether you want a full hub assembly or only the bearing.
- Clarify ABS sensor inclusion: confirm if the hub assembly price includes the sensor and whether an alignment is included.
- Get quotes for both sides if you need work on multiple wheels: sometimes doing both wheels at once saves time and may reduce overall labor costs.
Conclusion: A well-documented quote makes it easier to compare shops, understand what you’re paying for, and decide on the best approach for your CR-V.
Summary
Replacing a wheel bearing on a 2007 Honda CR‑V typically costs about $250–$600 per wheel, with front-wheel-drive models often requiring hub assemblies that can push prices higher. The main cost drivers are the part type (hub assembly vs bearing only), front vs rear axle, and local labor rates. Always request an itemized quote and consider multiple shops to ensure you get a fair price. If possible, ask about including a brake inspection and alignment in the estimate to avoid extra trips to the shop.
How much to fix wheel bearing on Honda CRV?
between $390 and $603
The average cost for a Honda CR-V Wheel Bearing Replacement is between $390 and $603 but can vary from car to car.
What is the most common problem with Honda CR-V 2007?
Owner Reported Trouble Spots
- Engine Major.
- Transmission Minor.
- Noises/Leaks.
- Engine Cooling.
- Engine Electrical.
- Brakes.
- Drive System.
- Transmission Major. Transmission rebuild or replacement, torque converter, premature clutch replacement.
Is it worth fixing a wheel bearing?
Driving with bad wheel bearings impacts the safety of a vehicle, and it could cause a serious car accident. We do not advise driving on them when they fail and recommend getting them checked out as soon as possible.
Can I drive my car with a bad wheel bearing?
No. It is not safe to drive with a bad wheel bearing. A broken wheel bearing can seize, overheat, or even cause the wheel to detach completely.