Typically, you should expect about 300 to 700 per wheel for a wheel bearing replacement on a 2006 Honda CR-V, depending on whether you install a full hub assembly or just the bearing, and on local labor rates.
This article breaks down what drives the cost, outlines common price ranges for front- and rear-wheel bearing services on the 2006 CR-V, and offers guidance on getting accurate quotes from local shops. The 2006 CR-V uses front-wheel hub assemblies for the front bearings and a similar hub design for the rear bearings, with costs influenced by part choice and service complexity.
What influences price
Several factors determine the final bill for wheel bearing work on the CR-V, including which wheels are affected (front vs rear), whether the job uses a hub assembly or bearings-only service, part quality, and regional labor rates. ABS sensor integration and any related wiring or sensor replacement can also affect price.
Cost estimates by scenario
The following ranges reflect typical market pricing in the United States as of 2024–2025. Prices can vary by region and shop, and OEM dealer parts tend to be more expensive than aftermarket alternatives.
Front-wheel hub assembly replacement (per wheel)
Costs for this common service typically include both parts and labor.
- Front-wheel hub replacement (per wheel): Parts $100–$350; Labor $100–$250; Total roughly $180–$600.
Note: Some shops quote a single, all-inclusive price per wheel that factors in standard labor and typical part costs; OEM parts can push the total toward the higher end.
Rear-wheel bearing/hub replacement (per wheel)
Costs for rear-wheel hub/bearing replacement typically include parts and labor.
- Rear-wheel hub/bearing replacement (per wheel): Parts $120–$350; Labor $110–$300; Total roughly $240–$650.
Rear-wheel work can be somewhat more labor-intensive on older vehicles depending on rust and access, which can push the price toward the higher end.
Other factors that can raise or lower the bill
Several non-part factors influence the final price. Consider these when comparing quotes.
- Parts quality: Aftermarket vs OEM/hub assemblies can vary in price and warranty.
- Labor rate: Rates differ by region and whether you choose an independent shop or a dealership.
- ABS sensor and wiring: If a sensor is integrated into the hub assembly and needs replacement, expect additional cost.
- Additional services: Brake inspection, rotor resurfacing, or rotor replacement may be recommended and add to the total.
- Accessibility and corrosion: Significant rust or hard-to-reach hubs can increase labor time.
To obtain an accurate total, request written estimates from multiple shops and specify your preferred parts (OEM vs aftermarket) and whether the hub assembly or bearing-only service is desired.
DIY considerations
Wheel bearing replacement is a challenging job that requires special tools and safety precautions. If you lack experience with suspension work, professional installation is generally the safer and more reliable option.
Summary
For a 2006 Honda CR-V, expect roughly $180–$600 for a front-wheel hub replacement per wheel and about $240–$650 for a rear-wheel hub/bearing replacement per wheel, with bearing-only service typically costing less but being less common on this model. Prices vary by region, part choice, and labor rates, so obtaining quotes from several shops is the best way to confirm current costs. A mechanic can also confirm whether ABS sensor work, rotor replacement, or alignment considerations apply.