On a 2005 Honda Civic, expect roughly 300 to 600 dollars per axle when replacing the hub assembly, and about 150 to 350 dollars if you’re replacing only the bearing.
The price you pay depends on whether you’re dealing with the front or rear wheels, whether the shop uses a complete hub assembly (bearing included) or just the bearing itself, and your local labor rates. Other factors such as ABS sensor integration, whether OEM or aftermarket parts are used, and whether related components must be replaced can push the total higher.
What affects the cost
Prices vary by region, shop, and part choice. The following factors most influence the final bill:
- Front vs rear wheel bearing replacement, since front hubs are more commonly replaced as a complete hub assembly.
- Using a hub assembly (bearing integrated) vs. replacing only the bearing itself.
- Parts choice: OEM vs aftermarket parts, and the quality or warranty of those parts.
- Labor rates at the shop and any diagnostic or shop supplies fees.
- Related components or sensors (for example, ABS sensor, wheel speed sensor) that may require attention during the job.
In practice, the final price reflects a combination of components, labor time, and any incidental repairs that become necessary during service.
Typical price ranges by component and scenario
These ranges are general guidelines for a 2005 Civic and can vary by market and part source.
- Front-wheel hub assembly replacement (bearing included): Parts roughly $100–$300; labor $150–$300; total per axle typically around $250–$600.
- Front-wheel bearing replacement without hub (less common on this model): Parts roughly $20–$100; labor $80–$200; total about $100–$300.
- Rear-wheel bearing/hub replacement: Parts roughly $80–$250; labor $100–$250; total per axle around $180–$500.
Dealerships often charge more, especially for OEM parts, while independent shops may offer lower rates. Prices can also rise if multiple parts or sensors are involved or if alignment is required after the replacement.
Tips for getting a fair quote and avoiding surprises
Use these steps to obtain an accurate estimate and minimize unexpected costs:
- Ask for an itemized estimate that separates parts, labor, and any additional fees.
- Confirm whether the quote covers a hub assembly (bearing included) or just the bearing itself.
- Check if wheel alignment, ABS sensor work, or other related repairs are included or listed as separate line items.
- Get quotes from at least two shops and compare both OEM and aftermarket part options.
- Inquire about warranties on parts and labor and the expected turnaround time for the fix.
Being proactive with these questions helps ensure you understand the scope of work and the total cost before the job begins.
Summary
Replacing a wheel bearing on a 2005 Honda Civic typically costs a few hundred dollars per axle, with front hub assemblies generally more expensive than rear bearings. The exact price depends on whether the hub assembly or just the bearing is replaced, part choices (OEM versus aftermarket), regional labor rates, and any related repairs or sensor work. To get the best value, compare multiple quotes, confirm what’s included in each, and consider both parts and labor separately.