The 2017 Honda Fit uses 0W-20 synthetic engine oil. For best results, Honda recommends using Honda Genuine 0W-20, and plan for about 3.4 quarts of oil when changing the oil and filter.
In more detail, the 2017 Fit's 1.5-liter i-VTEC engine is designed around a 0W-20 viscosity that meets current API and ILSAC standards. Using a different viscosity or a non-synthetic oil can impact fuel economy, emissions, and engine protection, especially under extreme temperatures or demanding driving conditions.
Oil type and specifications
The following specifications are the core requirements you should follow when selecting oil for a 2017 Fit.
- Viscosity: 0W-20
- Oil type: Full synthetic engine oil
- Certifications: API SN (or newer) and ILSAC GF-5 (or GF-6)
- Capacity: Approximately 3.4 quarts (with oil filter) for an oil change
- Recommended brand: Honda Genuine 0W-20 or a high-quality equivalent that meets the above specifications
Choosing oil that matches these specs helps protect the engine, maintain efficiency, and preserve the vehicle’s maintenance schedule.
Maintenance and change guidance
To keep your Fit running smoothly, follow these guidance points about oil changes and maintenance considerations.
- Change interval: With 0W-20 synthetic oil, Honda’s Maintenance Minder typically calls for oil and filter changes every 7,500 miles (12,000 km) under normal driving conditions, or sooner if the system indicates; severe driving conditions may require more frequent changes.
- Oil capacity: Plan on about 3.4 quarts (with filter) per change.
- Filter and quality: Always replace the oil filter with each oil change and use oil that meets API SN or newer and ILSAC GF-5 or GF-6 ratings.
- Usage notes: Keep an eye on the maintenance minder signal and consult the owner’s manual for any model-specific tweaks or recommendations.
Adhering to these maintenance practices helps ensure engine longevity, consistent performance, and optimal fuel efficiency.
Summary
For a 2017 Honda Fit, use 0W-20 synthetic engine oil that meets API SN/newer and ILSAC GF-5/GF-6 specifications, with a typical oil-change capacity of about 3.4 quarts (including the filter). Follow Honda’s Maintenance Minder guidance for intervals, and always replace the oil filter with each change for best results.