Typically, replacing a TPMS sensor on a Lexus IS250 costs about $120–$320 per wheel; for all four wheels, budget roughly $480–$1,280.
What you need to know about TPMS replacements for the IS250
The tire pressure monitoring system (TPMS) uses sensors inside each tire to measure pressure and relay data to the vehicle’s computer. When a sensor fails or a tire is replaced, a new sensor often must be installed, the wheel must be reseated, and the system may need to be relearned or programmed to the car. Prices vary based on sensor quality, whether you choose OEM (original equipment manufacturer) or aftermarket parts, and whether the shop includes programming in the quoted price.
Cost breakdown by component
Before listing the typical price ranges, note that labor, parts, and programming can all vary by shop and location. The numbers below reflect common market rates in the United States as of 2024–2025.
- Sensor price (OEM vs aftermarket): generally $40–$120 per sensor
- Labor to remove tire, install the new sensor, and reseat the tire: typically $40–$120 per wheel
- TPMS programming/relearn: commonly $0–$60 per wheel (some shops include this in labor)
- Valve stem replacement (if the stem or seal is worn): about $10–$40 per stem
- Wheel balancing and potential minor tire service (if required): $15–$100
In practice, most customers see per-wheel totals in the range of roughly $120–$320. If you replace all four sensors at once, the total typically falls within about $480–$1,280, depending on parts and whether programming is included.
Single wheel replacement vs. four-wheel replacement
If only one sensor is faulty, you’ll pay for a single new sensor and the corresponding labor and relearn. Replacing all four sensors at once can sometimes yield a discount on parts or labor, and it reduces the chance of future service calls for the remaining older sensors.
Shop comparison tips
To get the best price, request a written quote that itemizes parts, labor, and programming. Ask whether the price includes the relearn procedure, and whether any wheel alignment or tire balancing is needed afterward. In some cases, independent shops offer competitive rates versus the dealership, and you may find bundled pricing if you replace multiple sensors at once. Also inquire about warranties on sensors and labor.
What to expect during service
The service typically begins with diagnosing the TPMS fault, then removing the tire from the wheel, installing the new sensor in the valve stem, reseating the tire, and performing a relearn so the vehicle recognizes the new sensor. Some vehicles require a specific relearn sequence via a scan tool; others are relearned automatically when you drive a short distance. Expect road testing after installation to verify the system is reading correctly.
Summary
Replacing a tire pressure sensor on a Lexus IS250 generally runs about $120–$320 per wheel, with four wheels typically totaling $480–$1,280 depending on sensor type, labor rates, and whether programming is included. OEM sensors tend to be on the higher end of the price range, while aftermarket options can reduce costs. Shop around, compare quotes, and confirm whether relearn is included in the price to avoid surprises.