Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

How much does it cost to replace a power steering pump on a 2010 Honda CRV?

Replacing the power steering pump on a 2010 Honda CR-V typically runs about $500 to $900 in the United States, with most owners paying around $600 to $750 depending on parts and labor. The exact price hinges on the pump choice (OEM versus aftermarket), local labor rates, and whether additional components or fluid service are required.


The following breakdown explains what drives the price, what’s usually included, and how your final bill might vary. Prices can differ by region and shop, and additional repairs or leaks can raise the total noticeably.


Cost components and typical ranges


Understanding the main cost drivers helps you compare quotes. The cost components below reflect common scenarios for a standard pump replacement on a 2010 CR-V.



  • Parts cost: A new power steering pump can range from about $120–$260 for aftermarket parts, while Honda/OEM pumps are typically $180–$350 or more depending on supplier and availability.

  • Labor: Replacing the pump usually requires about 2–4 hours of labor. At typical shop rates of $75–$125 per hour, labor can be roughly $150–$500.

  • Fluids and hardware: Fresh power steering fluid, seals, clamps, and possibly a new belt or pulley can add about $10–$60.

  • Diagnostics and incidental repairs: If the system has additional leaks or related components (hoses, rack, or reservoir) need replacement, the bill can rise significantly, potentially to $800–$1,200 or more.

  • Tax and shop fees: Some regions apply sales tax and random shop supplies or disposal fees, typically a small extra amount.


Concluding: For a straightforward pump replacement with standard parts and no major complications, expect a total in the broad range above, with most customers landing between about $600 and $750.


Regional differences and shop-rate variations


Prices vary widely by region and the type of shop (dealer, independent shop, or chain). Labor rates tend to be higher in urban or coastal markets and lower in rural areas. OEM parts often cost more than aftermarket equivalents, and some shops include a fluid flush or system bleed in the quoted price while others itemize it separately.


What to ask your shop before authorizing work


To avoid surprises, ask these questions and request a written estimate:



  • Is the quote for parts and labor only, or does it include fluids, belts, and installation hardware?

  • Do you use OEM Honda parts or aftermarket replacements, and what are the warranty terms?

  • Will you flush the power steering system and replace the fluid, or simply top off?

  • Are there potential additional costs if leaks or related components are found?

  • What is the estimated time to complete the job, and is a loaner car or shuttle available if needed?


Concluding: Getting a detailed, itemized quote helps you compare apples-to-apples and avoid unexpected charges if ancillary work becomes necessary.


What to expect during the service


Here’s how a typical pump replacement goes and what you’ll be billed for:



  • The mechanic accesses the pump, often moving aside components and loosening a belt, then disconnects hoses and the pump.

  • The new pump is installed, glands are sealed, and the belt tension is adjusted; the system is refilled with fresh power steering fluid, and any necessary bleeding is performed.

  • A test drive checks for leaks and proper operation; final checks confirm there are no remaining issues.


Concluding: Plan for a few hours at the shop, depending on access and whether additional parts or repairs are required.


Summary


For a 2010 Honda CR-V, a power steering pump replacement typically costs between $500 and $900, with many residents seeing $600–$750 after factoring in parts, labor, and routine fluids. OEM parts tend to push the price higher than aftermarket equivalents. Always request a detailed, written estimate that breaks out parts, labor, fluids, and any potential extra work, and ask about warranties on both parts and labor. If you’re facing a suspected pump failure, obtaining multiple quotes and confirming whether a system flush is included can help you secure a fair deal.

How many hours does it take to replace a power steering pump?


How long does it take to replace a power steering pump? Depending on your vehicle's complexity, it could take as little as an hour or more than three hours.



How much does it cost to replace a power steering pump on a Honda CRV?


The average cost for a Honda CR-V Power Steering Pump Replacement is between $1,145 and $1,449. Labor costs are estimated between $90 and $133 while parts are priced between $1,054 and $1,316. This range does not include taxes and fees, and does not factor in your unique location. Related repairs may also be needed.



Can I still drive with a bad power steering pump?


It's not safe to drive with a bad power steering pump, as it can make steering difficult and unpredictable, especially at lower speeds.



How much is a 2010 Honda CR-V worth today?


The value of a used 2010 Honda CR-V ranges from $2,102 to $6,469, based on vehicle condition, mileage, and options. Get a free appraisal here.


Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.