Typically, replacing a Wrangler mirror costs between about $130 and $650 for a single mirror, with labor usually adding $50–$150. Replacing both mirrors can roughly double the total. This article breaks down the current price ranges and the main factors that influence what you’ll pay.
Jeep Wranglers come in several generations (JK, JL, and higher trims such as the Gladiator JT) and with varying mirror configurations. You can replace just the glass or the entire housing, and features like power adjustment, heating, auto-dimming, and integrated turn signals can push costs higher. Below is a detailed look at what drives price and what you can expect to pay today.
Parts and features that influence cost
What you’re buying drives the price. The following ranges reflect common Wrangler scenarios, from simple glass replacements to fully equipped assemblies.
- Glass replacement only (non-heated, manual mirror): typically $20–$60 for aftermarket glass; $40–$100 for OEM glass.
- Complete mirror housing replacement (manual, non-heated): about $60–$150 for aftermarket parts; $120–$250 for OEM housing.
- Power-adjustable mirror assembly (no additional features): roughly $80–$230 (aftermarket) or $120–$300 (OEM).
- Heated mirrors (with heating element): approximately $120–$350 for aftermarket or $180–$450 for OEM versions.
- Auto-dimming mirrors or mirrors with integrated turn signals: about $150–$420 (aftermarket) or $200–$600 (OEM with features).
- Left vs right side: price ranges are similar, though right-side availability can vary by trim and generation; expect only modest differences.
- OEM vs aftermarket: OEM parts typically cost more (roughly $100–$400) but may fit and match finishes better; aftermarket parts can be substantially cheaper (roughly $60–$200) with variable fit/finish.
- Paint to color-match the housing: usually $20–$70 on top of the part cost, depending on shop color accuracy and vehicle color.
In short, the biggest price differences come from choosing an OEM versus aftermarket part and whether you add features such as heating, dimming, or turn signals.
Part-only costs can be instructive, but most buyers will face a combined part-and-assembly price that reflects both the part choice and labor. The precise price varies by Wrangler generation, trim, and regional market.
Labor and installation
Labor costs depend on the shop, region, and whether you supply the part or have the shop source it. The following ranges cover typical installation scenarios.
- Labor to install a full mirror assembly (one side): about $50–$150, depending on shop rates and complexity.
- Glass-only installation (when replacing glass in an existing housing): about $20–$60 for labor.
- Electrical work for power, heated, or turn-signal mirrors: typically $20–$100 if additional wiring or programming is required.
- Average hourly labor rate: roughly $50–$120 in many markets; some dealer shops can be higher.
- Dealerships vs independent shops: dealerships tend to be at the higher end of the spectrum, while independent repair shops often offer lower rates for similar tasks.
Labor can be a significant portion of the total, especially when the replacement involves power, heating, or other integrated features that require electrical checks or programming.
Saving money and choosing the right part
Smart shopping can reduce costs without compromising safety or fit. Consider these approaches before you buy:
- Decide whether you need glass-only replacement or a full housing replacement based on damage. Glass-only can be far cheaper if the housing is intact.
- Compare OEM versus aftermarket parts. OEM parts fit the same, but can be pricier; aftermarket parts may offer substantial savings with acceptable fit for many drivers.
- Check if color matching is necessary. A painted housing may add $20–$70 but improves the look, especially on newer Wranglers.
- Get quotes from multiple shops for both parts and labor to compare totals. Some shops will break out parts and labor separately, which helps with cost comparisons.
- Consider DIY for glass-only replacements if you’re comfortable: many Wrangler owners report success with glass replacements using basic tools and a repair manual.
Costs can vary widely by region and by the specific Wrangler model year, so a few quotes will give you the clearest picture of your total.
When to replace vs repair
Not every mirror issue requires a full replacement. Consider these guidelines when deciding what to do:
- If the mirror glass is cracked or shattered, replace the glass or the entire housing depending on damage to the housing and mounting points.
- If the housing is bent or cracked beyond cosmetic repair, replace the housing to ensure proper alignment and visibility.
- If the mirror won’t adjust, or heated/turn-signal features don’t work, you may need a new assembly or targeted electrical work; evaluate part cost versus labor and potential reprogramming.
- Color-matching or trim-specific designs may influence whether you choose OEM or aftermarket parts.
In short, structural or functional damage to the housing generally warrants a full replacement, while cosmetic issues with glass alone can often be handled cheaper with a glass-only repair.
Summary
Replacing a Jeep Wrangler mirror involves a spectrum of options, from glass-only repairs to full assemblies with power, heat, and signals. Part choice (OEM vs aftermarket), the presence of features, and labor costs largely determine the total price, which typically ranges from about $130 to $650 for a single mirror, with higher-end configurations pushing toward or beyond $700 in some cases. Getting multiple quotes and deciding between DIY glass replacement or professional installation can materially affect the final cost.
For the most accurate estimate, check your Wrangler’s generation (JK, JL, or Gladiator JT), confirm which features you want (power, heat, dimming, turn signals), and obtain quotes from several reputable shops or dealers in your area. This approach will give you a clear view of the total before you commit.