A manual clutch replacement on a Dodge Ram 3500 typically costs about $1,500 to $3,000, with higher bills if the flywheel must be replaced or resurfaced. In automatic-equipped trucks, the service differs and is usually oriented around torque converter or transmission work, which can push costs higher.
What affects the price
Several factors influence the final bill, including whether your Ram 3500 has a manual or automatic transmission, the condition of the flywheel (and whether it needs resurfacing or replacement), the truck’s engine/torque (diesel engines place more stress on clutches), labor rates by region, and any ancillary parts that must be replaced during the job.
Manual vs automatic transmissions
Clutch replacement applies to manual transmissions. Automatic transmissions don’t use a traditional clutch pedal replacement; instead, service centers may quote for torques converters, clutches inside the automatic, or a full transmission rebuild, which can significantly affect the total cost.
Cost breakdown for a manual Ram 3500
Below is a typical breakdown of the main cost drivers for a manual transmission clutch job on a Ram 3500. Prices are ballpark figures in USD and can vary by location and shop.
- Clutch kit (disc, pressure plate, throw-out bearing, pilot bearing): 200–600
- Flywheel service: resurfacing 100–300; replacement 500–1,200 depending on DMF/SMF design
- Hydraulic parts and related components (master/slave cylinder, lines, seals): 60–250
- Labor to remove/ reinstall transmission and perform the job: 450–1,800
- Miscellaneous (gasket sets, fluids, alignment): 40–150
In summary, part costs plus labor for a manual Ram 3500 clutch replacement typically fall in the $1,500 to $3,000 range, with higher prices if the flywheel must be replaced or if the vehicle uses a more expensive dual-mass flywheel design.
Cost ranges by scenario
Before listing typical scenarios, note that exact pricing depends on the truck’s year, drivetrain configuration, and whether the flywheel requires replacement. The ranges below reflect common cases in North America as of 2024–2025.
- Manual transmission with no flywheel replacement: roughly 1,200–2,800
- Manual with flywheel resurfacing (SMF or lighter DMF): roughly 1,500–3,000
- Manual with flywheel replacement (dual-mass or heavy DMF): roughly 2,000–4,000
- Automatic transmission (not a standard clutch replacement; service focused on torque converter or internal clutches): roughly 2,000–6,000 or more if a full rebuild is needed
These ranges are estimates and can vary by region, shop rates, and the complexity of the teardown and reassembly. Always request a detailed, itemized quote.
What to ask your shop
When you get quotes, ask for an itemized breakdown that separates parts, labor, and any flywheel work. Confirm whether the flywheel will be resurfaced or replaced, and whether the clutch kit includes the throw-out bearing and pilot bearing. If you have a diesel Ram 3500, inquire about high-torque clutch options and any additional DMF-related costs.
Summary
Replacing a clutch on a Dodge Ram 3500 is a labor-intensive job with costs that hinge on the transmission type and flywheel needs. For a manual transmission, you’re generally looking at $1,500 to $3,000, with higher totals if the flywheel must be replaced. For automatics, the service is different and can cost more due to torque converter or full transmission work. Always get a detailed, itemized estimate and consider regional labor rates when planning.