For a 2016 Honda CR-V, the starter cost depends on the part source and whether you install it yourself or have it done at a shop. In practice, you can expect the starter itself to cost roughly $120–$550, with total installed costs typically ranging from about $250 to $800 depending on labor charges and regional pricing.
When you’re evaluating options, consider OEM versus aftermarket, remanufactured versus brand-new, and whether you’ll reuse the old starter or need a core charge. This article breaks down typical price ranges, installation costs, and where to buy, so you can budget accurately.
Price ranges for the starter itself
Starter prices vary by source and by whether the unit is brand-new, remanufactured, or used. The following ranges cover common options you’ll encounter for a 2016 CR-V.
- New OEM Honda starter: approximately $350–$520
- New aftermarket (non-OEM) starter: approximately $180–$350
- Remanufactured/rebuilt starter: approximately $110–$250
- Used or salvage-yard starter: approximately $60–$150
Prices will vary by retailer and whether the part is for the 2.4L engine option in the 2016 CR-V, and whether it’s a direct fit or requires minor compatibility checks. Always verify compatibility before purchase.
Labor and total cost to replace the starter
Labor costs depend on region, shop rates, and how accessible the starter is in your specific vehicle. The job typically takes about 1–2 hours for a professional mechanic, not including any diagnostic or extra charges.
- Typical labor time: 1.0–2.0 hours
- Common hourly rate: $70–$120
- Estimated labor cost: $70–$240
- Additional charges: diagnostic fee (if applicable), core charge (for reman units), disposal fees
Including the starter and labor, total installed costs commonly fall in the range of about $250–$800, depending on the part type chosen and local labor rates. Always request a written estimate before work begins.
Where to buy the starter
Shopping options include both in-person and online retailers. Compare pricing, return policies, and warranty terms to ensure you’re getting a reliable unit that fits your car.
- Honda dealer or official HondaParts site
- Auto parts chains (e.g., AutoZone, O'Reilly, Advance Auto Parts)
- Online retailers (RockAuto, eBay Motors, Amazon)
- Used or salvage yards and remanufacturing shops
Prices and availability can shift quickly, especially for used or remanufactured units. Double-check the part number, engine size, and electrical connections to ensure a proper match for your 2016 CR-V.
DIY considerations and quick tips
Replacing a starter can be a manageable DIY project for experienced enthusiasts but often best left to professionals due to safety concerns and the need for proper alignment and torque specs.
- Ensure you disconnect the battery before starting any work.
- Use the correct wrench set and torque specs when reinstalling bolts.
- Consider replacing the battery and wiring connections if they show signs of wear.
If you choose to DIY, plan for 2–4 hours to complete the job and have a friend assist with lifting the heavy starter. If in doubt, get a professional estimate to avoid costly mistakes.
Summary
For a 2016 Honda CR-V, the starter cost depends on part type and source: OEM new, aftermarket new, remanufactured, or used. In-cars, expect the part price to range roughly from $60 to $550, with total installed costs typically between $250 and $800 depending on labor rates and location. Always compare quotes from multiple retailers or shops, verify compatibility, and consider a professional installation for safety and reliability.