The quickest way to reset the oil life indicator on a 2018 Honda CR-V is to turn the ignition to ON with the engine off, display the Oil Life screen on the Driver Information Interface, and press and hold the RESET/SELECT control until it reads 100%.
What you need to know
The 2018 CR-V uses a Driver Information Interface inside the instrument cluster to display maintenance reminders, including Oil Life. Resetting is a routine post-oil-change step that ensures the maintenance timer starts fresh. The process relies on the steering wheel controls and a reset knob on the instrument panel.
Standard reset procedure
Follow these steps to reset the Oil Life indicator on most 2018 CR-V models:
- Turn the ignition to ON with the engine OFF ( accessory power without starting the engine ).
- Use the steering wheel controls to navigate to the Oil Life display within the Driver Information Interface.
- Press and hold the SELECT/RESET knob (on the instrument cluster) for about 2 seconds until the Oil Life reads 100%.
- Release the control. The display should show Oil Life at 100%, confirming the reset.
After a successful reset, the Oil Life should show 100% and the countdown to the next recommended oil change will restart. If you don’t see 100% after holding the button, try the steps again or consult the owner’s manual for your exact trim level.
Alternate considerations and troubleshooting
Some trims or regional variations may use slightly different button labels or sequences. If the standard method doesn’t work, try these alternatives and checks:
- Ensure the engine is completely OFF and the ignition is in the ON position before starting the reset sequence.
- Try using the DISP or INFO button to cycle to the Oil Life screen, then press and hold the RESET/SEL button again.
- If the display won’t reset, cycle the ignition off and back to ON, then repeat the procedure. A momentary electronic lag can occur.
If you’re still unable to reset the Oil Life indicator, consult the owner’s manual for your exact trim or contact a Honda service adviser. Some dealers can perform the reset remotely or confirm that the service history is properly recorded.
When to reset
Reset the Oil Life indicator after an oil change or when a technician replaces the oil and filter. Resetting ensures the maintenance reminder accurately reflects the vehicle’s current oil life and the time until the next recommended service.
Summary
Resetting the oil life on a 2018 Honda CR-V is a quick in-car procedure: with the engine off, display the Oil Life on the Driver Information Interface and press and hold the RESET/SELECT control until it shows 100%. If the standard steps don’t work, cycle the ignition, double-check the display, or refer to the owner’s manual for your specific trim. Regularly resetting after an oil change helps you stay on top of maintenance intervals.