Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

How much does a starter cost for a 2010 Toyota Camry?

A starter for a 2010 Toyota Camry typically costs about $60 to $350 for the part alone, depending on whether you choose a remanufactured unit, a new aftermarket part, or an OEM Toyota starter. Labor to install is extra and can raise the total price significantly depending on shop rates and location.


To understand the full scope, this article breaks down typical price ranges, what factors influence the cost, and practical tips for saving money. The 2010 Camry’s starter options largely fall into three categories: remanufactured/rebuilt, aftermarket new, and OEM-new, with prices fluctuating by seller, core charges, and regional differences.


What affects the price


Pricing for a Camry starter is influenced by part type, seller, warranty, core charges, and whether you buy from a dealership, an auto parts chain, or online. Availability can also vary by the Camry’s engine variant (2.4L four-cylinder vs. V6) and by region.


Before exploring specific price ranges, keep in mind that you may encounter core charges for remanufactured units and occasional shipping fees. These factors can shift the total at checkout.



  • Remanufactured/Rebuilt starter: typically $60–$120, with a possible core charge of around $0–$50. Most come with limited warranties and are the cheapest option.

  • New aftermarket starter (non-OEM): typically $120–$250, often with a 1–3 year warranty and varying shipping terms.

  • OEM Toyota starter (new): typically $220–$350, usually with a dealership or OEM-approved warranty and potentially longer availability lead times.


In short, remanufactured units are the most budget-friendly, aftermarket new parts sit in the mid-range, and genuine OEM starters are typically the most expensive. Always check current pricing across retailers to confirm the best deal for your vehicle’s exact configuration.


Where to buy and typical price ranges


Prices can vary by retailer, location, and whether you buy online or in-store. The ranges below reflect common street prices from major outlets in the United States during 2024–2026.



  • Brick-and-mortar auto parts stores (e.g., AutoZone, O'Reilly, Advance Auto Parts): remanufactured $60–$120; new aftermarket $120–$250; OEM-new $230–$350.

  • Online retailers and marketplaces (e.g., RockAuto, Amazon, manufacturer direct): remanufactured $60–$110; new aftermarket $120–$240; OEM-new $210–$340.

  • Dealership (Toyota or authorized service centers): typically $260–$350 for OEM-new, with higher labor estimates if quoting installed price.


Prices can include or exclude tax, shipping, and core charges. Always verify compatibility with your exact Camry model (engine code and trim) before purchase to avoid buying the wrong starter.


Installation considerations


Installing a starter on a 2010 Camry is a moderate repair that can usually be completed in 1–2 hours at a shop, depending on access and vehicle condition. Some owners with basic mechanical skills may complete it in a couple of hours DIY, though space in the engine bay and disconnecting the battery are prerequisites. Labor costs vary by region and shop, commonly ranging from about $70 to $200 per hour.


If you are replacing the starter yourself, ensure you disconnect the battery, follow proper safety procedures, and consult your vehicle’s service manual for the exact mounting bolts and electrical connections. If you’re unsure, professional installation is recommended to avoid electrical damage or misalignment.


Tips to save on a starter purchase


How to curb costs while ensuring reliability:



  • Compare several retailers for the same part number to capture price and warranty differences.

  • Consider a remanufactured unit from a reputable supplier with a solid warranty and a decent return policy.

  • Check for core charges and confirm whether they are refundable when you return the old starter.

  • Look for bundle deals or discounts, especially if you’re replacing other components at the same time.

  • Verify compatibility with your Camry’s engine code (2.4L 2AZ-FE in many 2010 models) to avoid fitment issues.


Ultimately, balancing price with warranty and reliability will help you choose the best option for your vehicle and budget.


Summary


For a 2010 Toyota Camry, part prices typically range from roughly $60 to $350 depending on whether you choose a remanufactured, new aftermarket, or OEM starter. Expect labor to add to the total if you hire a shop, and keep core charges in mind for remanufactured units. Shopping around across brick-and-mortar stores, online retailers, and dealerships can yield meaningful savings, especially if you verify exact compatibility and warranty terms.

Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.