A starter for a 2006 Honda generally runs about $60 to $360, depending on the model and whether you choose a new OEM part, a remanufactured aftermarket unit, or a used/refurbished starter.
This article outlines the main price drivers, typical ranges by popular 2006 Honda models, and practical buying and installation considerations to help you estimate and shop with confidence.
What affects the price
Prices vary based on the type of unit you buy (brand-new OEM, remanufactured aftermarket, or used), as well as the specific engine configuration and the retailer. A core charge may also apply, which is refunded when you return your old starter.
- OEM/new: Approximately $180–$350. These are dealer or factory-authorized units and tend to be the most costly option, especially for higher-output engines.
- Remanufactured aftermarket: Approximately $60–$180. A common, cost-efficient choice with varying warranty terms.
- Used/refurbished: Approximately $40–$120. Salvage-yard or online-seller starters offer the lowest upfront price but come with less reliability and shorter or no warranties.
- Core charge: Typically $0–$60, depending on the seller. The core is refunded once you return your old starter if it’s rebuildable.
Conclusion: Your price choice balances upfront cost, reliability, and warranty coverage, plus your willingness to handle installation or pay a shop for labor.
Price ranges by common 2006 Honda models
The following ranges reflect typical listings for the most common 2006 Honda models and engine setups. Exact prices vary by retailer, location, and whether the unit is new OEM, remanufactured, or used.
- 2006 Honda Civic (1.7L): New OEM ≈ $180–$320; remanufactured ≈ $90–$160; used ≈ $40–$100.
- 2006 Honda Accord (2.4L): New OEM ≈ $210–$350; remanufactured ≈ $110–$200; used ≈ $60–$120.
- 2006 Honda CR-V (2.4L): New OEM ≈ $210–$360; remanufactured ≈ $120–$210; used ≈ $50–$120.
- 2006 Honda Pilot (4.0L V6): New OEM ≈ $240–$420; remanufactured ≈ $130–$230; used ≈ $70–$140.
Conclusion: For budget-conscious buyers, a remanufactured aftermarket starter often offers a good balance of cost and reliability, but verify compatibility with your exact engine code and check warranty terms.
Installation and labor considerations
Replacing a starter is typically a 1–2 hour job for a capable DIYer, depending on access and model. Labor costs at a shop can add roughly $75–$150 to the bill in many areas. When ordering parts, confirm the part number and VIN compatibility, and consider adding a warranty if you buy aftermarket.
Summary: If you’re shopping for a 2006 Honda starter, expect a broad price range from about $60 to $360 depending on model and part type. New OEM units are the most expensive, remanufactured aftermarket options offer savings with decent warranties, and used starters are the cheapest but carry more risk. Always verify compatibility and factor in potential labor costs and core charges when budgeting.