The typical configuration for a 2006 Honda CR-V is separate low- and high-beam halogen bulbs: H11 for the low beam and 9005 for the high beam.
If your vehicle is a different market version or has aftermarket headlights, the bulb types may differ. This article outlines the common setup and how to verify the correct bulb for your specific car.
Common bulb types for the 2006 CR-V
Here are the two bulbs most often used in the standard US-spec 2006 CR-V headlights. These sizes apply to the front, main headlights and assume typical halogen assemblies.
- Low beam: H11
- High beam: 9005 (HB3)
Note that some export or trim variants may use different configurations, so always confirm with the owner's manual or the bulb guide printed on your vehicle’s headlight assembly.
How to verify the correct bulb for your specific vehicle
To be certain you have the right bulb for your exact CR-V model and trim, follow these verification steps before purchasing replacements.
- Consult the owner's manual or the integrated bulb guide in the vehicle’s maintenance manual to confirm the recommended bulb sizes for your year and market.
- Open the hood and locate the headlight assembly. Remove the dust cap or cover to access the bulb base, then note the size stamped on the bulb base (for example, H11 or 9005).
- Inspect any labels on the back of the headlight housing or inside the fuse/relay box area, which sometimes list the bulb sizes for the headlights.
- If you cannot read the bulb size or you have aftermarket headlights, bring the vehicle or a known-good bulb to an auto parts store, or contact a Honda dealership with your VIN to confirm the exact specification.
- Avoid touching the glass with bare hands when handling bulbs; oils can reduce bulb life. Use clean gloves or a cloth.
Confirming the exact bulb size for your specific vehicle helps prevent buying mismatched bulbs and ensures optimal brightness and beam pattern.
Summary
For most 2006 Honda CR-V models, the standard headlights use H11 for the low beam and 9005 for the high beam. Always verify against your owner's manual or the built-in bulb guide, especially if you have a non-US market version or aftermarket headlights. When replacing, handle bulbs carefully, avoid skin contact with the glass, and consider having a professional confirm the fit if you’re unsure.