For a 2010 Honda Civic, expect roughly $200–$600 per axle for a brake service that includes pads, with rotor replacement pushing totals higher. The exact price depends on trim, whether the rear brakes are drums or discs, and local labor rates.
Brakes on the 2010 Civic can vary by model year specifics and regional labor costs, so the best approach is to get a few quotes tailored to your exact car. This article breaks down typical component costs, labor factors, and scenario-based totals to help you budget.
Brake system basics and what drives price
Understanding the Civic’s brake setup helps explain why costs differ. Most 2010 Civics use front disc brakes, while rear brakes are drums on many base trims and discs on higher trims or sport variants. The Civic Si model uses four-wheel discs, which generally carries higher replacement costs. Labor rates at local shops also vary, influencing the final bill.
Brake components and common price ranges
The following list covers typical parts and associated installed prices you might see at a shop. Prices can vary by region and supplier.
- Front brake pads (disc brakes): $30–$90 per set; installed price commonly $150–$250 per axle.
- Front rotors: $40–$120 each; installed price commonly $150–$250 per axle.
- Rear brakes (drums with shoes on many trims): $25–$80 per set of shoes; installed per axle usually $120–$240.
- Rear rotors (if equipped with discs): $40–$110 each; installed per axle typically $150–$250.
- Brake fluid flush and general brake inspection: $60–$120.
Concluding the component costs, you’ll often see per-axle installed ranges around $200–$450 for disc brakes (pads plus rotors) and about $120–$240 per axle for drum/shoes on the rear. Exact figures depend on trim and rotor/shoe wear.
Typical totals by scenario
The scenarios below reflect common configurations for a 2010 Civic and show how totals can vary based on brake type and what’s being replaced. Labor rates vary by shop, but the estimates aim to reflect typical ranges in many U.S. markets.
- Non-Si Civic (LX/EX) with front discs and rear drums (pads only on front, shoes on rear): Front axle $160–$260 (pads only) or $260–$450 (pads+rotors); Rear axle $120–$240. Combined for both axles: roughly $380–$690 (pads only) or $520–$690 (pads+rotors on front) plus rear shoes.
- Non-Si Civic (LX/EX) with both axles having discs (rare for rear on some trims): Front axle $260–$450; Rear axle $150–$240. Combined for both axles: about $410–$690, and up to $690–$900 if both axles include rotors.
- 2010 Civic Si (four-wheel discs): Front axle $320–$600 (pads+rotors); Rear axle $280–$480 (pads+rotors). Full two-axle service: roughly $600–$1,080 or more, depending on rotor wear and hardware.
Concluding the scenario costs, the total bill for a full brake service typically ranges from about $600 to $1,100 for non-Si models and can exceed $1,000 to $1,700 for an Si, especially if rotors on both axles are replaced and labor rates are high.
Several factors drive the final cost beyond the base parts and labor rate:
- Whether rotors need to be replaced or can be resurfaced. Replacing rotors adds a significant amount to the total.
- Whether rear brakes are drums or discs. Drum-brake systems tend to be less expensive to service in some cases, but drum components can add up if shoes, springs, and wheel cylinders are replaced.
- Labor rate in your area. Urban and higher-cost regions typically charge more per hour.
- Vehicle trim and rotor size. The Civic Si uses larger, heavier rotors and calipers, which increases part and labor costs.
- Local shop promotions or warranty programs. Some shops offer bundled brake services at a discount or include free inspections.
For accurate pricing, contact a few local shops with your exact vehicle year, trim, and whether you want pads-only or a full pad+rotor replacement on each axle.
Summary
In summary, braking costs for a 2010 Honda Civic range widely based on trim and whether the rear brakes are drums or discs. Expect roughly $200–$600 per axle for a pad-only or pad+rotor replacement, with Si models generally toward the higher end of the spectrum due to larger components. Always check with multiple shops for quotes, and consider whether you need rotors replaced, which can substantially raise the cost. A proactive brake service with proper inspection can help avoid more expensive repairs later.
Bottom line tips
- Ask for a breakdown of pads, rotors, and labor separately in the quote.
- Inquire about rotor resurfacing versus replacement to gauge true cost savings.
- Compare at least three estimates to ensure you’re getting a fair price for your exact Civic configuration.
How much do 4 brakes cost?
The average cost of replacing your brake pads ranges from $130 to $400 per wheel axle. This covers only the brake pads. In a full brake job, brake pad and rotor replacement costs start at $300 to $350 per axle and can rise to around $600 or more.
What is a fair price for a brake job?
A complete brake repair that includes pads, rotors, and calipers typically averages between $200 and $800 depending on the vehicle and parts used.
How much are brakes for a 2010 Honda Civic?
The average price for a 2010 Honda Civic Brake Pads and Shoe at Advance Auto Parts is around $62.52, with a range that starts at $15.99 and goes up to $105.99.
How much should a brake job cost on a Honda Civic?
The average cost for a Honda Civic Brake Pad Replacement is between $255 and $308 but can vary from car to car.