Acura brake pads typically cost between 60 and 120 per axle for the pads themselves when buying OEM parts, with cheaper aftermarket options available and higher prices for ceramic or high-performance variants. Installation adds to the total, often bringing the per-axle price into the 150–350 range at a shop, depending on labor rates and rotor condition.
Pricing varies by model and trim, and by whether you source OEM parts from a dealer, aftermarket from a retailer, or opt for high-performance ceramic options. Labor rates differ by region and shop. This article breaks down typical price ranges and what affects them for popular Acura models.
Pad price ranges by type
The following figures refer to the cost of a full set of pads for one axle, before labor or taxes. They reflect common prices seen in North American parts catalogs and independent shops.
- Front brake pads (OEM/first-party): typically 60–120 per axle
- Rear brake pads (OEM/first-party): typically 40–90 per axle
- Aftermarket non-OEM pads (budget/entry-level): typically 25–60 per axle
- Aftermarket ceramic or low-dust pads: typically 60–120 per axle
- High-performance/low-dust ceramic pads: typically 100–150+ per axle
Prices can vary by model, and some Acura trims may use different pad shapes or sensor-equipped sets that affect price. Always check the exact part number for your car when shopping.
Total installed cost considerations
Beyond the price of the pads, installation costs depend on labor rates, rotor condition, and whether any rotor resurfacing or replacement is needed. The ranges below are common for North American shops.
- Front axle installed cost (pads + labor): roughly 150–350
- Rear axle installed cost (pads + labor): roughly 120–250
- Both axles: roughly 290–600, depending on parts and rotor condition
Other factors that can influence total cost include hardware replacement, parking brake shoe servicing on rear brakes, brake fluid flush, and whether a brake pad wear sensor is present and requires replacement.
Model and regional considerations
Some Acura models have higher-cost options due to rotor size, caliper design, or availability of OEM pads. For example, larger SUVs like the MDX or RDX can push per-axle pad prices higher than compact cars like the ILX or TLX. Regional pricing differences at dealerships vs. independent shops can also swing totals by several tens of dollars.
Summary
Acura brake pad costs vary widely based on model, pad material, and supplier. Expect a typical pads-only range of roughly 60–120 per axle for front pads and 40–90 per axle for rear pads when using OEM parts, with aftermarket options available from about 25–150 per axle depending on material and brand. Installed costs generally run about 150–350 per axle for front brakes and 120–250 per axle for rear brakes, with total costs rising if rotors or sensors need replacement. If you’re shopping for a specific model, confirm part numbers and prices with your dealer or trusted parts retailer to get an exact quote.