Fuel injectors for a 2016 Honda Odyssey typically run about $60 to $180 per injector, depending on whether you buy aftermarket, remanufactured, or OEM parts. Replacing all six injectors can cost roughly $360 to $1,080 in parts, with labor adding several hundred dollars more depending on your location and shop rates.
What determines the price
Several factors influence how much you’ll pay for fuel injectors. OEM parts tend to be pricier, while aftermarket or remanufactured units can save money. The Odyssey’s 3.5-liter V6 uses direct-injection injectors, which can carry higher prices than older port-injection units. Availability of a full set versus individual units also affects total cost.
Current price ranges for the 2016 Odyssey injectors
Prices vary by supplier and condition. Here is a breakdown to help you budget:
- OEM new injector: typically $120–$180 each
- OEM remanufactured injector: typically $70–$120 each
- Aftermarket new injector (non-OEM): typically $60–$150 each
- Used/ salvaged injector: typically $30–$70 each
Note: Some high-performance or direct-injection units may exceed these ranges. Always verify compatibility with your vehicle’s VIN and ensure seals/o-rings are included or budget for them.
Estimating totals: if you’re replacing all six injectors, multiply the per-unit price by six and add potential costs for seals, O-rings, and gaskets. Labor will vary by shop but is a significant part of the overall expense.
For a quick reference, a six-injector parts kit at typical price ranges could be roughly $360–$1,080, with labor often adding several hundred dollars more depending on rates and complexity.
Labor and total cost considerations
Replacing six direct-injection injectors can require substantial labor, especially if the intake manifold must be removed. Labor times commonly range from a few to several hours, depending on access and the shop’s workflow. Typical labor rates run roughly $75–$150 per hour, so total labor for six injectors might fall in the hundreds to near the low thousands, depending on location and whether extra work (like gasket replacement or high-pressure fuel system care) is needed.
Direct-injection specifics for the 2016 Odyssey
The 2016 Odyssey’s direct-injection system means injector work is more high-pressure and requires careful handling. Symptoms prompting replacement include misfires, rough idle, reduced fuel efficiency, or warning lights. Because of the high-pressure system and possible need for manifold access, professional installation is recommended.
Where to buy injectors
Shop sources include official Honda parts departments, authorized OEM distributors, major auto parts retailers, and salvage yards. It’s wise to compare prices, check return policies, and confirm compatibility with your VIN. When possible, ensure that you receive fresh seals and O-rings with your injectors or budget for these parts separately.
- OEM and dealer sources (Honda dealerships or official parts distributors)
- Major auto parts retailers (online and brick-and-mortar)
- OEM-specified remanufactured injectors from reputable suppliers
- Salvage yards for used or lightly tested injectors
Getting multiple quotes helps you lock in a fair price for both parts and installation. Ensure the shop provides a clear estimate that itemizes parts, labor, and any ancillary services.
Summary
For a 2016 Honda Odyssey, expect a per-injector price roughly between $60 and $180 depending on whether you choose OEM, remanufactured, aftermarket, or used units. Replacing all six injectors typically costs $360–$1,080 for parts, with labor adding several hundred dollars more. Always verify compatibility with your VIN, consider the complexity of direct-injection work, and obtain multiple quotes to ensure a fair total cost.