Spark plugs for a 2013 Ford Edge typically cost about $4–$20 per plug, depending on brand and type. Since the Edge’s V6 engine requires six plugs, a full set runs roughly $24–$120 before labor. With installation, most replacement jobs fall in the range of about $100–$350 total, depending on whether you DIY or use a shop and which plugs you choose.
What affects spark plug pricing for the 2013 Edge
The 2013 Edge uses a coil-on-plug ignition system and requires six spark plugs. Price varies by plug material, brand, and where you buy them. Here is a breakdown of common options and their typical prices per plug (and per six-pack) to help you gauge the cost.
Plug types and their price ranges
Prices shown are approximate current ranges and can vary by retailer, region, and any promotions.
- Copper-core plugs: about $2–$4 each; six-pack roughly $12–$24
- Platinum plugs: about $6–$12 each; six-pack roughly $36–$72
- Iridium plugs: about $10–$18 each; six-pack roughly $60–$108
- OEM vs aftermarket brands: price differences are usually modest within a given material class; OEM/Motorcraft options can be similar to aftermarket equivalents and are commonly recommended for Ford engines
In short, the higher upfront cost of platinum or iridium plugs is typically offset by longer service intervals, depending on driving conditions and maintenance practices.
Labor considerations and total cost
Beyond the price of the plugs themselves, labor is a major factor. The Edge’s coil-on-plug arrangement means the mechanic must remove each coil, replace the plug, and re-seat the coil, which takes time and careful torque to spec. Labor rates vary by region and shop.
- DIY replacement: You pay only for the plugs themselves (roughly $12–$120 for a six-pack, depending on type and brand). No labor charge is involved, but you’ll need basic tools and time to complete the job.
- Professional replacement: Typical labor costs range from about $90–$300 total, depending on location, shop, and how long the job takes (roughly 1–2 hours in many cases). Add the plug price for a full total.
When you combine parts and labor, here are rough total cost ranges you can expect for a 2013 Edge, depending on plug type and whether you DIY or go to a shop.
Copper plugs (parts: $12–$24; labor: $90–$300) → total approximately $102–$324
Platinum plugs (parts: $36–$60; labor: $90–$300) → total approximately $126–$360
Iridium plugs (parts: $60–$108; labor: $90–$300) → total approximately $150–$408
Buying tips and maintenance notes
Where to buy spark plugs
Reliable options include major auto parts retailers (AutoZone, Advance Auto Parts, O’Reilly Auto Parts), warehouse clubs, and online outlets (RockAuto, Amazon, manufacturer websites). Compare prices for the exact part number matched to your engine to avoid mismatches.
Tips for saving money and ensuring a proper install
- Confirm the recommended plug type for your specific engine variant (3.5L Duratec V6 is common for the 2013 Edge). Use the torque specification and gap settings provided by Ford or the plug manufacturer.
- If you’re aiming to DIY, gather new ignition coils/seals if you notice coil boots wear, and use dielectric grease on the boots for a better seal.
- Watch for promotions or bundled deals (six-pack plugs with a coil-on-plug service kit) to reduce total cost.
Summary
For a 2013 Ford Edge, six spark plugs are required. Expect per-plug prices in the $2–$20 range depending on copper, platinum, or iridium material, with six-plug sets scaling accordingly. Labor costs vary by region and shop, but DIY replacement keeps costs to plug price alone, while professional service typically adds roughly $90–$300 in labor. When shopping, prioritize the correct plug type for your engine, consider long-term durability vs. upfront cost, and factor in local labor rates to estimate your total expense accurately.