Rotors for a Honda CR-V typically cost about $40 to $190 per rotor, depending on front versus rear position, OEM versus aftermarket parts, and whether the rotor is standard or a drilled/-slotted performance variant. Front rotors tend to be pricier than rear rotors.
What determines rotor pricing
Prices are driven by the rotor’s origin (OEM vs aftermarket), the design and features, and the brand’s quality. The ranges below reflect common pricing across major retailers in recent years, with real-world variation by model year, region, and seller.
- OEM Honda rotors (front) typically around $60–$120 per rotor; (rear) around $40–$90 per rotor.
- Aftermarket standard rotors from reputable brands (e.g., Bosch, Centric, Raybestos) commonly around $40–$100 per rotor.
- Premium aftermarket rotors (higher-grade, coated, or performance variants) generally in the $90–$180 per rotor range.
- Drilled, slotted, or ceramic-coated rotors can push prices higher, often $100–$190+ per rotor.
Note: Some retailers sell rotors in sets or pairs. Check whether the price is per rotor or per axle, and confirm whether any needed hardware or sensors are included or required.
Common rotor designs and why they cost more
Standard cast-iron rotors are the baseline. Drilled or slotted designs improve heat and brake bite but cost more due to manufacturing complexity. Coatings (e.g., zinc) reduce rust, adding to price. Premium brands may bundle coatings, coatings warranty, and higher-grade materials into the price.
Front vs rear rotor pricing
CR-V front rotors are generally larger and pricier than rear rotors. The following ranges illustrate typical price bands by axle position.
- Front rotors: OEM typically $60–$120 each; aftermarket standard $40–$100 each; premium or drilled/slotted $100–$180+ each.
- Rear rotors: OEM typically $40–$90 each; aftermarket standard $30–$70 each; premium or specialty finishes $70–$120 each.
When budgeting, multiply the per-rotor price by the number of rotors needed for the axle or vehicle, and add any applicable taxes. Labor costs are separate and vary by shop and location.
Labor and total cost considerations
Rotors are usually replaced along with pads, and sometimes with calibration or sensor checks. Labor costs vary regionally, but typical brake service pricing includes several components beyond the rotor itself.
- Brake rotor replacement labor: roughly $150–$300 per axle, depending on shop rates and whether pads are replaced at the same time.
- Total outlay for a full front-axle replacement (parts and labor) commonly ranges from about $240 to $400 per axle with standard aftermarket rotors; OEM rotors or drilled/slotted variants can push this higher.
To avoid surprises, obtain a written estimate that itemizes rotor price, any hardware or sensors, and labor. Prices fluctuate with promotions, inventory, and regional demand.
Summary
For a Honda CR-V, rotor prices typically fall in a broad range of $40–$190 per rotor, influenced by front-versus-rear position, OEM versus aftermarket sourcing, and whether the rotor is a standard or performance design. Front rotors generally cost more, and premium or drilled/slotted rotors raise prices further. When budgeting, factor in the number of rotors needed, consider whether you’re replacing just rotors or upgrading with new pads, and include installation labor. Shopping across dealers and reputable retailers often yields the best current pricing.