Motor mounts for a 2009 Honda Accord generally cost about $60 to $200 per mount as a part, with installation bringing the total to roughly $300 to $700 for a full replacement set, depending on engine (2.4L four-cylinder vs. V6), whether you buy OEM or aftermarket mounts, and local labor rates.
What mounts does a 2009 Honda Accord have?
These are the mounts typically found in this generation of Accord. The list below identifies each primary mount and its role, noting that exact configuration can vary by engine and trim.
- Front engine mount (engine-support mount closest to the radiator)
- Rear engine mount (toward the back of the engine bay)
- Transmission mount (attaches the transmission to the chassis)
- Torque/stabilizer mount (present on some configurations; may share a mounting point with the engine)
In summary, most 2009 Accords use two engine mounts, a transmission mount, and, depending on the configuration, a torque or stabilizer mount.
Parts price ranges for a 2009 Honda Accord
Prices shown are typical ranges you’ll see from retailers and vary by OEM versus aftermarket brands as well as by the part’s complexity and the engine type (2.4L four-cylinder or V6).
- Front engine mount: $60–$180
- Rear engine mount: $60–$160
- Transmission mount: $60–$150
- Torque/stabilizer mount: $40–$120
Note: OEM Honda mounts tend to be at the higher end of these ranges, while reputable aftermarket options usually sit toward the lower end. Always confirm compatibility for your exact VIN and engine code before purchasing.
Installed cost and labor considerations
Labor costs can significantly affect the total bill, and installation times depend on which mounts are being replaced and how easily they can be accessed.
- Labor time (rough guidance): Front engine mount 1–2 hours; rear engine mount 1–2 hours; transmission mount 1–2 hours; replacing all mounts can total 3–6 hours depending on access and, occasionally, auxiliary work required.
- Labor rate: Common ranges are $75–$125 per hour in many regions; dealer rates or high-cost metro areas can be $125–$180 per hour.
- Estimated installed cost (parts + labor): Replacing a single mount commonly lands around $200–$420 installed; replacing all mounts can run roughly $350–$900 or more, depending on parts and labor charges.
Conclusion: To avoid surprises, request a written estimate that itemizes each part and the corresponding labor time, and consider getting quotes from multiple shops.
Shopping tips and best practices
Before buying parts or scheduling service, keep these considerations in mind to balance cost with reliability.
- Check for signs of failing mounts: excessive engine movement, persistent vibration at idle, clunking noises during acceleration or deceleration.
- Choose parts wisely: OEM factory mounts offer a direct fit and durability, while reputable aftermarket mounts can save money but ensure they come with a warranty.
- VIN verification: confirm the correct part number for your engine code and year to avoid misfit mounts.
- Warranty and returns: look for a minimum one-year warranty on mounts and hardware; some brands offer longer coverage.
- Shop comparison: obtain at least 2–3 price quotes and ask about labor hours; have the shop explain any additional charges (e.g., subframe bolts, alignment checks).
Conclusion: With careful shopping and a clear quote, owners can replace motor mounts on a 2009 Honda Accord without overpaying, while ensuring proper fit and performance.
Summary
For a 2009 Honda Accord, motor mounts cost about $60–$200 per mount as parts, with installation bringing the total to roughly $300–$700 for a full set, depending on engine type and brand. Expect additional labor costs that vary by region and shop. Identify which mounts you need (engine and transmission mounts, plus any torque/stabilizer mounts), compare OEM and reputable aftermarket options, and obtain multiple quotes to secure a reliable, cost-effective replacement. Always verify compatibility with your exact VIN and engine configuration.