Brake work on a 2009 Chevrolet Silverado typically costs between roughly $300 and $800 per axle for a standard pads-and-rotors replacement, with full two-axle service often ranging from about $600 to $1,600. Prices vary by region, shop, and parts quality.
The following breakdown explains the factors that drive those costs and provides current ranges you can expect from shops and online parts retailers as of 2024–2025.
Brake components and typical costs
The ranges below reflect common installed-cost estimates from independent shops and national chains. Actual prices depend on your vehicle’s exact configuration, whether rotors are being replaced, and the part quality you choose.
- Pads and rotors replacement, per axle (front or rear where rotors are used): $250–$420
- Pads-only replacement, per axle: $150–$250
- Caliper replacement (installed, per caliper): $180–$350
- Brake hoses/lines replacement (per line): $60–$150
- Brake fluid flush (including bleeding): $70–$120
Prices can vary widely. If rotors require machining or if calipers are seized, or if OEM parts are chosen, costs can push higher. Conversely, opting for aftermarket parts or a discount shop may reduce the price somewhat.
Service options and estimated totals
Understanding service options helps you plan and compare quotes. The ranges below reflect common brake service scenarios and their likely total costs, including parts and labor, as of 2024–2025.
- Pads-only replacement (all four corners, if you choose to do so): $300–$500
- Pads + rotors replacement (all four corners): $500–$900
- Full brake job on both axles (pads, rotors, plus any necessary hoses or seals): $700–$1,400
- Caliper replacement (both sides if needed): $360–$700
- Brake fluid flush: $70–$120
- Additional items (rotor resurfacing vs. rotor replacement, wheel bearings, ABS sensor work) can add to the total; always obtain a detailed quote.
Your final bill will depend on the exact parts used (OEM vs aftermarket), local labor rates, and whether any ancillary repairs are required. Getting multiple written quotes from reputable shops is the best way to ensure a fair price.
Where to shop and how to save
- Shop around: obtain several quotes from independent shops, national chains, and dealerships to compare prices.
- Ask about part options: aftermarket pads and rotors are usually cheaper than OEM; many shops offer bundled warranties on aftermarket parts.
- Consider remanufactured or reconditioned calipers if they come with a warranty and a reputable vendor.
- Get a single, itemized estimate that lists parts, labor, and any additional services (bleeding, fluid, lines) to avoid surprise charges.
- If you can, perform non-safety-critical prep work (e.g., cleaning and inspection) yourself to reduce labor time, but leave brake system work to a professional if you’re unsure.
Note: The Silverado’s braking system may involve ABS sensors and other components that benefit from professional inspection after any rotor or caliper service. Always confirm your quote includes any required inspections and tests.
Summary
For a 2009 Chevy Silverado, expect brake work costs in the ballpark of $300–$800 per axle for a pads-and-rotors replacement, with two-axle jobs typically $600–$1,600 depending on parts and labor rates. Prices vary by region, shop, and part choice; obtaining multiple written quotes is the best way to ensure fair pricing. Regular maintenance and proactive inspection can help prevent more costly repairs down the line.