For a 2019 Subaru Outback, brake pad sets generally fall in a broad range: expect about $40 to $180 per axle for parts, depending on the material and whether you choose aftermarket or OEM pads. Labor to install pads typically adds about $100 to $300 per axle, so a full front-and-rear replacement commonly runs roughly $300 to $700 in many shops.
Brake pad pricing is influenced by material choice, front vs rear, sensor inclusion, rotor condition, and where you buy the pads. This article explains typical price ranges and what drives the cost for this model.
Pricing factors for the 2019 Outback
Understanding what drives brake pad prices helps you compare options without overspending.
Pad material options and typical price ranges
Prices vary by material. The following ranges are typical for a complete two-pad set per axle (front or rear):
- Organic/NA resin pads: approximately $40–$70 per axle
- Semi-metallic pads: approximately $60–$120 per axle
- Ceramic pads: approximately $70–$140 per axle
- High-performance or OEM-brand ceramic pads: roughly $110–$180 per axle
Note: Prices can differ by retailer and whether the pads include wear sensors or anti-squeal shims. OEM Subaru pads generally sit at the higher end of these ranges.
Other price-influencing factors
Beyond material, consider these factors when budgeting for brake pads on a 2019 Outback.
- Front vs rear: Front pads usually wear faster and may cost more per axle than rear pads.
- Sensor-equipped pads: Some pads include wear sensors; these typically cost more.
- Rotor condition: If rotors are resurfaced or replaced, total costs rise with rotor prices and shop labor.
- OEM vs aftermarket: OEM Subaru pads typically cost more than aftermarket equivalents with similar performance.
- Geographic variation and retailer: Prices vary by region and by whether you purchase in-store or online.
When you factor in labor and potential rotor work, the bottom line can vary significantly from the part price alone.
Estimated installed costs and buying options
Here’s how installed costs typically shape up, with common buying paths.
- Dealership/OEM pads with installation: often the highest end of the range, front axle sets installed roughly $200–$350; all four wheels $350–$650 or more.
- Independent shop or fast-lane chain: commonly $180–$300 per axle for front or rear; $300–$600 for four wheels, depending on rotor work.
- Aftermarket pads purchased online and installed by a shop: price varies widely; expect $150–$350 per axle including labor if rotors are not replaced.
Shop around and confirm if rotors will be resurfaced or replaced, and whether a wear sensor is included, to avoid surprises on the bill.
What to buy and where
To find the best price and fit for your 2019 Outback, compare these common sources.
- Automotive parts retailers (e.g., AutoZone, O'Reilly, NAPA): a wide selection of aftermarket pads with price ranges posted online.
- Online retailers and marketplaces (e.g., RockAuto, Amazon): often the widest price range; verify compatibility for your trim and sensor needs.
- Dealerships: OEM pads with installation, typically higher price but guaranteed compatibility.
Tip: Have your technician confirm rotor condition and sensor compatibility before you commit to a particular pad type.
Summary
Brake pad prices for a 2019 Subaru Outback span a broad range due to material choices, front/rear differences, sensor inclusion, and rotor considerations. Expect roughly $40–$180 per axle for pads, with labor adding about $100–$300 per axle. A full front-and-rear replacement commonly lands in the $300–$700 range, though exact numbers depend on your location, shop, and pad choice. Compare OEM and aftermarket options, and factor in rotor work and sensors to avoid surprises.
Note
The numbers above are general guidance and may change with supply and demand. For a precise quote, contact local auto repair shops or parts retailers with your Outback's trim level and whether you want OEM or aftermarket pads, and whether you need rotors or sensors replaced as well.