For a 2009 Ford Fusion, front brake pad replacements typically run about $40–$100 per axle for aftermarket pads, while the rear brakes use drum brakes with shoes (not pads) and cost roughly $20–$60 per axle in parts; labor costs vary by location and shop. This guide breaks down current pricing expectations and what influences the final bill.
The question centers on how much you’ll pay for brake pads on a 2009 Fusion, but the exact price depends on which brakes you’re replacing (front discs vs. rear drums) and the quality level of the pads. Below is a breakdown of typical price ranges, plus factors that can push costs up or down.
Front brakes: price range and options
Prices vary by material, brand, and whether you want rotors included or a separate rotor service. Here are the common ranges you’ll see for a front brake pad set per axle.
- Economy / budget pads: typically $25–$40 per axle
- Mid-range pads (standard metallic or semi-metallic): typically $40–$70 per axle
- Premium / ceramic pads (often OEM-equivalent or high-performance): typically $70–$120 per axle
In summary, the front brake pad kit per axle is the main price driver for a 2009 Fusion, with costs climbing for premium materials or if you add hardware, sensors, or rotors into the kit.
Rear brakes on a 2009 Ford Fusion
Most 2009 Ford Fusions use rear drum brakes with shoes rather than rear discs. As a result, you won’t be buying brake pads for the rear; you’ll be buying brake shoes and, in some cases, drums and related hardware. Here are typical parts prices for the rear per axle.
- Rear drum brake shoes kit: roughly $25–$60 per axle
- Rear drums and related hardware (if replacement is needed): roughly $20–$80 per axle
- Hardware/adjuster kits or wheel cylinders (optional): $5–$30 per component
When rear drums are involved, the cost of parts tends to be lower per axle than the front, but labor time can increase if drums require heavy adjustment or resurfacing.
Labor and total installed cost considerations
Labor costs vary by region and shop, and whether you replace rotors or service other components changes the total.
- Front brakes installed per axle (pads, possible rotor resurfacing or new rotors): roughly $150–$300
- Rear brakes installed per axle (shoes, drums, hardware): roughly $150–$350
- Do-it-yourself savings: you can cut labor costs but will need tools and time
Note that dealer-installed prices tend to be higher, while independent shops and big-box auto parts stores may offer competitive labor rates and package deals.
Where to shop and how to compare
To get an accurate price for your vehicle, compare different retailers and consider the following:
- Brand and material: economy, mid-range, and premium pads
- Inclusion: pads alone vs. pad set with hardware or replaced rotors
- Vehicle specifics: confirm the Fusion’s rear brakes are drums or discs for your model year
- Location and availability: price varies by region and retailer
Shopping tips: check for promotions, bundled brake kits, and online coupons; ask about warranties and whether the price includes installation or rotor service.
Summary
For a 2009 Ford Fusion, front brake pads are the cost driver, typically $40–$100 per axle for aftermarket options, while rear brakes (drum shoes) run about $25–$60 per axle for parts. Labor adds significantly to the total, with installed prices often ranging from roughly $150–$350 per axle depending on the shop and whether rotors or drums need replacement. Always confirm whether your car uses front discs with rear drums and price out parts, hardware, and labor separately to avoid surprises at the counter.
Bottom line: budget for the front brakes first, understand the rear drum setup, and shop around to balance price, quality, and warranty when planning a brake replacement for your 2009 Ford Fusion.