The front wipers on the Tesla Model 3 are typically 26 inches on the driver’s side and 17 inches on the passenger’s side.
Across most model years and regions, this driver-passenger pairing is the standard. Always verify the exact size for your specific car by checking the owner's manual, the blade itself for stamped length, or the packaging if you still have it. Regions outside North America occasionally list different sizes, so double-check before purchasing aftermarket blades.
Front wiper blade sizes
Here are the standard front wiper lengths commonly used on Model 3 vehicles. Use this as a baseline when shopping for replacements.
- Driver-side blade: 26 inches
- Passenger-side blade: 17 inches
These two lengths represent the typical front wiper pairing for most Model 3 models in many markets. If your car differs, adjust accordingly and confirm with a reliable parts source.
Market variations and verification
Because specs can vary by year, region, or trim, it's important to confirm before buying. The following steps help verify the correct blade size for your car:
- Consult the vehicle’s owner’s manual or the Tesla support site for your year and region.
- Inspect the current blades for size markings or check the packaging if it’s still available.
- Contact a dealer or parts retailer with your VIN to confirm compatibility.
Once you have confirmed the exact sizes, purchase blades that match those lengths and consider replacing both blades at the same time for balanced performance.
Rear wiper note and installation tips
In the United States, the Model 3 generally does not include a rear wiper, so there is no rear blade size to replace. Some international variants or prior market configurations may differ; always refer to your region’s manual if you’re unsure about rear-wiper availability.
When replacing front blades, you’ll usually find the process straightforward: unlock the old blade, align the new one with the arm’s connector, and ensure a secure snap. Replacing in pairs helps maintain consistent clearing performance and reduces streaking.
Summary
The default front wipers for a Tesla Model 3 are 26 inches on the driver’s side and 17 inches on the passenger’s side. Verify these sizes for your exact year and market, especially if the vehicle is an international variant or has undergone prior replacements. Buy from reputable brands and replace both blades to ensure optimal visibility and performance.
Can I use a 28 wiper instead of 26?
Don't. The potential for poor performance and even damage just isn't worth the hypothetical extra inch of visibility. Sticking with the manufacturer's recommended size is the only way to guarantee a clean, streak-free wipe and a long life for your wiper system.
What size are Tesla Model 3 wiper blades?
The blade on the driver's side must be 26 inches (650 mm) long and 19 inches (475 mm) long for the blade on the passenger's side. Ensure the connector on the replacement blade is the same as the original blade.
What size is the Tesla Model 3 windshield shade?
Tesla Windshield Sun Shade FAQs
The unfolded dimensions of this Tesla windshield sunshade are: Model 3: 135×94CM; Model Y: 140CM×95CM. Folded size: 33CM.
Does the Tesla Model 3 have windshield wipers?
Completely. You can put them on manual mode and there are four different speed settings. Or you can turn them on auto. We typically leave ours on auto. And it seems to work pretty well it senses.