The 2017 Lincoln MKX with a 2.7-liter EcoBoost V6 takes about six quarts of engine oil during a standard oil change, including the filter. This article explains the capacity, its implications for maintenance, and how to verify you have the right amount.
What the official specification says
The vehicle's service documentation lists an engine oil capacity of 6.0 quarts (5.7 liters) when performing an oil change with the filter installed. This figure is used as the baseline for most maintenance schedules.
How much oil you need if you don't replace the filter?
If you skip replacing the oil filter, the amount may be slightly less, typically around 5.5–5.7 quarts, depending on the exact engine variant and the filter size. Always verify with the owner's manual or a trusted dealer for your specific VIN.
Practical maintenance tips
When planning an oil change, gather the recommended viscosity and grade (often SAE 5W-30 synthetic for this engine). Use a compatible oil filter and ensure the oil drain plug and gasket are properly sealed. After adding oil, always recheck the level with the dipstick and run the engine to allow oil to circulate before a final check.
Summary
For the 2017 Lincoln MKX equipped with the 2.7L EcoBoost engine, expect to use about 6 quarts of engine oil during an oil change with a new filter. Confirm exact requirements for your VIN in the owner's manual and consult a dealership if in doubt.