Approximately five quarts of engine oil are needed for a full oil change on the 2017 Dodge Grand Caravan with the 3.6L Pentastar.
Official oil capacity for the 3.6L Pentastar
The factory specification for the 3.6L Pentastar V6 used in the 2017 Dodge Grand Caravan lists an oil capacity of 5 quarts (4.7 liters) when replacing the oil and filter. This is the amount needed to reach the full mark on the dipstick after a standard oil change.
Practical notes
In practice, most service technicians and owner manuals indicate five quarts with a new filter as the standard fill. If the oil is drained completely and the filter is replaced, you should begin by adding five quarts and then check the level, topping off if necessary to reach the full mark.
What to expect during an oil change
Before performing an oil change, gather the following items:
- Five quarts of engine oil (check the owner's manual for the exact grade and viscosity recommended for your climate).
- One new oil filter compatible with the 3.6L Pentastar engine.
- Tools, a drain pan, and a funnel.
When the drain is complete and the new filter is installed, pour in about five quarts, start the engine, and check for leaks. Then recheck the dipstick and top off as needed to bring the level to the full line.
How to verify the correct oil level
To confirm the level, run the engine to operating temperature, turn it off, wait a few minutes for oil to settle, and check the dipstick. The level should be between the upper and lower marks; add small amounts if needed in 0.25-quart increments and recheck.
Summary
The 2017 Dodge Grand Caravan with the 3.6L Pentastar typically requires five quarts (4.7 liters) of engine oil when performing an oil change with a new filter. Use the recommended viscosity for your climate, and always verify the level with the dipstick after the change to ensure proper lubrication and engine health.