The 2016 Jeep Patriot with a 2.4 L engine typically takes about 5 quarts of oil when you replace the filter, and about 4.5 quarts if you don’t change the filter. The usual oil grade is SAE 5W-20, but you should verify the exact specification in your owner’s manual for your climate and driving conditions.
Official oil capacity (with and without a filter)
The figures below reflect standard capacity for a full oil change. Always confirm your vehicle’s specifics in the manual or with a dealer, as exact capacities can vary by model year or engine variant.
- With filter change: 5.0 quarts (4.7 L)
- Without filter change: 4.5 quarts (4.3 L)
In practice, many owners plan for about 5 quarts to ensure the full level after replacing the filter. After adding oil, always check the dipstick and top off in small increments to reach the proper level.
Oil type and viscosity recommendations
Using the right oil is essential for the 2.4 L Tigershark engine. The standard recommendation for most 2016 Patriot models is 5W-20 viscosity, with synthetic or synthetic-blend oil preferred for better protection. Always confirm the exact grade and specification in your owner's manual, as recommendations can vary by climate and driving conditions.
- Recommended viscosity: SAE 5W-20, synthetic or synthetic-blend
- Standards: API SN or ILSAC GF-5 (or newer)
- Climate note: In extremely hot climates or under heavy-load conditions, some owners may refer to the manual for alternatives; verify for your vehicle
Sticking to the recommended viscosity and performing oil changes on schedule helps protect the engine and maintain performance.
Summary
For the 2016 Jeep Patriot 2.4 L, plan for about 5 quarts of oil when performing a standard oil change with a new filter, or about 4.5 quarts if the filter isn’t being replaced. Use SAE 5W-20 oil (synthetic or synthetic blend) and follow the owner’s manual for exact specifications and climate considerations. Regular oil changes are key to engine longevity.
Is the 2.4 L engine in a Jeep Patriot a good engine?
The 2.4-liter is the better choice since it doesn't sacrifice much in terms of fuel economy despite having more power. Manual models are rated at 23/29 mpg and automatic models at 21/28 mpg.
How much oil does a 2016 2.4 L Jeep Patriot take?
Oil Grade: SEO11
| Viscosity: | 5W-20 (All TEMPS) |
|---|---|
| Capacity: | 4.5 quarts (with filter). After refill check oil level. |
| Torque: | 20 ft/lbs (Oil Drain Plug) |
What kind of oil does a 2016 Jeep 2.4 take?
AMSOIL OE 0W-20 100% Synthetic Motor Oil.
What is the best oil for a 2016 Jeep Patriot?
2016 JEEP PATRIOT Motor Oil
- Valvoline MaxLife Full Synthetic High Mileage Motor Oil SAE 5W-20.
- Valvoline High Mileage 150K with MaxLife Plus Technology Motor Oil SAE 5W-20.
- Valvoline MaxLife Extended Protection Full Synthetic High Mileage Motor Oil SAE 5W-20.
- Valvoline Daily Protection Synthetic Blend Motor Oil SAE 5W-20.