Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

How many quarts of oil does a 2016 Buick Enclave 3.6 take?

The 2016 Buick Enclave with the 3.6-liter V6 engine requires about 6 quarts of engine oil for a full change with a new filter. This capacity can vary slightly depending on the exact filter and draining efficiency, so always verify with the dipstick during the service.


Capacity basics for the 3.6L V6


Understanding the official oil capacity helps plan a routine oil change. The Enclave’s 3.6L V6 is part of GM’s modern V6 family and uses a standard fill when you replace the filter during a full change.



  • 6 quarts with a new oil filter – the official capacity for a complete oil change on the 2016 Enclave 3.6L V6.

  • About 5 quarts without including the filter – a rough baseline if you’re estimating drain-only removal, though you should replace the filter during a standard service.


In practice, installers typically begin with six quarts, then use the dipstick to confirm the level is within the recommended range before finishing the fill.


Oil type and viscosity


Use a Dexos1 approved motor oil, typically 5W-30, for the 3.6L V6 in the Enclave. In extreme temperatures, follow the manufacturer’s guidance in your owner’s manual for the appropriate viscosity and oil specifications.


Practical notes for maintenance


For reliable engine health, adhere to the manufacturer’s maintenance schedule and use the recommended oil specification. If your driving is mostly short trips, high mileage, or frequent idling, you may need more frequent changes. Always verify the final oil level with the dipstick after adding oil.


Bottom line


The service-friendly answer is that the 2016 Buick Enclave 3.6L takes about 6 quarts of oil for a full change with a new filter, using Dexos1 5W-30 oil. Always confirm the exact amount by checking the dipstick and consult the owner’s manual for any model-year specific notes.


Summary


For a standard oil change on the 2016 Enclave’s 3.6L V6, plan on using about 6 quarts of oil (with filter). Use Dexos1 5W-30, and always verify the final level with the dipstick after adding oil to ensure the level sits in the recommended range.

How to make a Buick Enclave faster?


A Buick tuner chip can make your vehicle faster and more powerful. A performance chip is an easy and affordable way to increase the power and speed of your car. However, since these chips connect to your car's engine, they void your warranty.



How much oil does a 2016 Buick Enclave 3.6 L take?


Capacity: 6 quarts (with filter). After refill check oil level.



What type of engine oil does a 2016 Buick Enclave take?


5W-30
What type of oil is recommended for the Buick Enclave by the experts? The Buick Enclave runs on synthetic oil with a grade of 5W-30.



What year to stay away from Buick Enclave?


If you're going to avoid one Enclave SUV, make it the 2008 model. Although models very close to that year still have the same problems as the 2008 model, the 2008 Buick Enclave has pulled in more complaints and known issues than all other Buick Enclaves have.


Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.