The 2014 Honda Pilot with a 3.5 L V6 uses about 5.5 quarts of engine oil when you perform a standard oil change with a new filter, and the recommended viscosity is 5W-20 for most conditions.
Oil capacity and recommended viscosity
Key numbers you need to know before an oil change for the 3.5 L V6.
- Oil capacity (with filter): 5.5 quarts
- Recommended viscosity: 5W-20 (Honda-approved)
Note: This capacity refers to a typical oil change that includes replacing the oil filter. If you use a different filter or skip replacing the filter, the amount needed to reach the proper level may vary slightly; always fill gradually and verify with the dipstick.
Practical tips for maintenance
Use these tips to ensure a smooth oil-change process and accurate oil level checks.
Where to verify the official specification
Consult the 2014 Pilot owner's manual or Honda's official service information for the definitive capacity. The standard figure is 5.5 quarts with the filter, using 5W-20 oil in typical climates.
Summary
For a 2014 Honda Pilot with a 3.5 L V6, plan to use about 5.5 quarts of engine oil during a standard oil change with a new filter, with 5W-20 recommended. Always confirm the exact fill level with the dipstick after pouring, and refer to the owner's manual for climate-specific guidance or any updates.