Answer: It depends on the exact 4.6 L variant. The 2007 F-150’s 4.6 L V8 uses about 5 quarts of oil with the filter if it’s the older 2‑valve version, or about 6 quarts with the filter if it’s the newer 3‑valve version.
The question concerns the engine’s oil capacity, which varies by the 4.6 L variant used in the 2007 F-150. Ford published two common capacities for this truck, corresponding to the 4.6 L’s valve configuration. The official figure is listed as “with filter,” since changing the oil also involves replacing the oil filter.
Oil capacity by 4.6 L variant
The following capacities are the standard published amounts for the 4.6 L V8 variants that appeared in the 2007 F-150 lineup.
- 4.6 L V8 (2‑valve): 5 quarts of oil with filter
- 4.6 L V8 (3‑valve): 6 quarts of oil with filter
These figures are intended for a routine oil change with a new filter. If your engine uses a different configuration or you are performing an extended-oil-change interval, check the owner's manual for exact specifications or contact a Ford dealer with your VIN.
How to determine which capacity applies to your vehicle
To ensure you add the correct amount, identify which 4.6 L variant your truck uses and verify with documentation or a VIN lookup.
- Check the engine’s valve configuration or labeling on the engine cover if present (some engines indicate 2‑valve vs 3‑valve). This helps determine which capacity applies (5 qts vs 6 qts).
- Consult the owner's manual or a Ford dealership for the exact engine specification based on your VIN.
- During an oil change, fill toward the lower end (begin with 5 quarts for a 5‑quart capacity and 6 quarts for a 6‑quart capacity) and verify with the dipstick to avoid overfill or underfill.
In practice, most 2007 F-150s with a 4.6 L V8 fall into one of these two capacities. Verifying with official documentation or a VIN-based lookup is the safest way to confirm the precise amount for your particular truck.
Summary
The 2007 F-150’s 4.6 L V8 can require either 5 quarts (2‑valve variant) or 6 quarts (3‑valve variant) of oil, both including the filter. Always confirm the exact capacity using the owner's manual, the VIN, or a Ford dealer to ensure proper oil level and engine protection. Regular dipstick checks are essential after an oil change to verify correct fill.
What kind of oil does a 2007 Ford F-150 4.6 L V8 take?
5W-20
2004–2010 F-150 Models
During these years, most F-150s came with either a 4.6L or 5.4L V8 engine. Ford recommended 5W-20 conventional or synthetic oil for these engines. This viscosity offers the right balance of cold-start protection and high-temp durability.
Can I use 5W30 instead of 5W20 in my Ford F-150?
When you drive a Ford F-150 with a 5.0L V8 engine, your Ford F-150 oil type is SAE 5W-20 or SAE 5W-30 motor oil. Pair that with an OEM Ford F-150 oil filter, and you're good to go on Hudson and Port Richey streets.
What motor to avoid on a Ford F-150?
We recommend avoiding 2004-2008 F150 models due to spark plug ejection issues with the 5.4L V8 engine. The 2015-2016 models, while not bad, had some early aluminum body production quirks that Ford resolved in later years. Always research specific model years and have any used truck inspected before purchase.
Is the 2007 4.6 V8 a good engine?
The Ford 4.6L V8 is generally reliable and some units surpass 300,000 miles in fleet use - provided owners stick to the service schedule. The engine's modular design and simplicity also mean that it is easy to maintain.