The bolt pattern is 5x114.3 mm (five lug holes arranged on a circle with a 114.3 mm diameter). In simpler terms, it’s a 5-lug pattern across a 4.5-inch circle.
Understanding bolt patterns helps you choose wheels that fit properly. For the 2019 Accord, the standard configuration is five lug holes on a 114.3 mm bolt circle, typically with a hub-centric center bore around 64.1 mm to align the wheel precisely with the hub. Always verify these specs for your specific trim and any aftermarket options to ensure a proper and safe fit.
Wheel compatibility basics
What to check before you buy
Before shopping for wheels, note the essential specs that must match your Accord's hub.
- Bolt pattern: 5x114.3 mm
- Center bore: 64.1 mm
Matching these specs helps ensure the wheel seats correctly, clears brake components, and aligns with the vehicle's hub.
How to verify on your vehicle
Use these steps to confirm the bolt pattern if you’re not sure or you’re buying used wheels.
- Check the wheel specification label on the door jamb or in the owner's manual for the listed bolt pattern and center bore.
- Measure the distance between opposing lug holes across the wheel to confirm 114.3 mm (approximately 4.49 inches).
- Measure the hub bore inside the wheel opening; it should be about 64.1 mm for most US-spec 2019 Accords.
When in doubt, consult a dealer or the wheel manufacturer’s fitment data to avoid installation issues.
Summary
The 2019 Honda Accord uses a 5-lug, 114.3 mm bolt pattern with a 64.1 mm center bore. This specification is common among many Honda models, so aftermarket wheels are often available in this pattern, provided the center bore and offset are compatible.