The Acadia’s engine oil capacity is six quarts with a new filter (about 5.7 liters).
In 2013, the GMC Acadia was equipped with a 3.6-liter V6 engine. The official capacity for that powerplant is six quarts with a new oil filter; some references list it as roughly 5.7 liters. Always verify for your exact vehicle using the owner's manual or GM service data, since production changes or different filter parts can affect the exact requirement.
Official capacity and engine details
These numbers reflect the typical factory specification for the 3.6L V6 used in most 2013 Acadias.
- 3.6L V6 engine: 6 quarts (5.7 L) of engine oil with a new filter.
Note: If you are performing maintenance on a unit with a different oil filter configuration or a rare variant, consult GM service data for your VIN to confirm the exact quantity.
Oil change procedures and practical tips
Scheduling an oil change requires the right tools and a clean, level workspace. The steps below assume replacement of the filter and standard grade oil.
These steps provide a practical outline for performing an oil change on most 2013 Acadia 3.6L V6 vehicles.
- Warm the engine to operating temperature to ensure complete drainage of old oil.
- Park on a level surface, turn off the engine, and engage the parking brake.
- Place an oil drain pan under the drain plug and carefully remove the plug to drain the used oil.
- Remove the old oil filter and install a new filter, ensuring a proper seal.
- Install the drain plug, then pour in six quarts of new engine oil; use the grade and specification stated in the owner's manual (commonly 5W-30) and avoid overfilling.
- Start the engine, run for a minute, then turn off and check the oil level with the dipstick; top up if needed.
- Dispose of the used oil and filter responsibly and reset maintenance reminders if applicable.
After completing the change, recheck for leaks and confirm the oil level is within the proper range on the dipstick.
Summary
The 2013 GMC Acadia’s engine oil capacity is generally six quarts with a new filter (about 5.7 liters). Confirm exact amounts for your specific vehicle by consulting the owner’s manual or GM service data for your VIN, and follow the recommended oil type and change interval for best results.