The 2017 Nissan Altima with the 2.5-liter CVT typically requires about 9 quarts of Nissan CVT fluid for a full drain-and-fill, using NS-2 grade fluid. This is a general guideline; the exact amount can vary slightly based on service procedure and model specifics.
In more detail, the Altima’s continuously variable transmission (CVT) is designed to hold roughly nine quarts of fluid. Nissan commonly specifies CVT Fluid NS-2 for this model. When performing maintenance, some fluid remains in the torque converter and lines, so the amount you drain and replace during a single service may be somewhat less than the total capacity. Always consult the vehicle’s service manual or a Nissan technician for the precise figure for your VIN and procedure.
Capacity, fluid type, and service notes
To help you plan, here are the main figures and requirements commonly cited for the 2017 Altima CVT. The following reflects standard drain-and-fill practices rather than a full system flush.
For quick reference, the main numbers you should know:
- Total transmission fluid capacity (drain-and-fill): about 9 quarts
- Recommended CVT fluid: Nissan CVT Fluid NS-2 or an equivalent that meets NS-2 specifications
- Note: Actual amounts during a service can vary slightly depending on whether the torque converter and lines are drained or left filled
Concluding: the 9-quart figure is a typical guideline for a complete service on a 2017 Altima CVT; always verify the level using the service manual’s procedure for your exact vehicle.
Maintenance considerations
Why the exact quantity matters
Using the correct fluid type and an accurate quantity helps ensure smooth transmission operation and long-term reliability. Nissan specifies NS-2 for this model; using the wrong fluid or incorrect amounts can lead to shifting issues or transmission damage.
In practice, plan for roughly 9 quarts for a full drain-and-fill, but confirm with your owner's manual or a Nissan service bulletin for your specific VIN and service method.
Summary
Bottom line: A 2017 Nissan Altima with the 2.5L CVT typically takes about 9 quarts of CVT fluid (NS-2) for a complete drain-and-fill. Use NS-2 or an equivalent that meets Nissan NS-2 specs, and refer to the official service manual for your exact VIN and procedure.
What happens if I overfill my CVT?
Overfilling might seem harmless initially, especially if you're just trying to be cautious, but it can lead to shifting issues, pressure buildup, and even internal damage over time. If your transmission has started acting strange after a recent top-off, there's a good chance the fluid level might be too high.
What kind of CVT fluid does a 2017 Nissan Altima take?
Notes: Automatic Continuously Variable Transmission (CVT) Fluid -- PREMIUM TYPE NS-3. 2015-2018 Nissan Altima.
How many quarts of transmission fluid goes in a 2017 Nissan Altima?
With 2 and 5/8 of a quart you can remove the funnel. And put the dipstick back in the transmission. Tube. Now you need to start the engine. And get the fluid between 35.
How much transmission fluid does a Nissan CVT take?
Step 7: Refill with New CVT Fluid
| Model | Average Refill Amount (After Drain) |
|---|---|
| Nissan Sentra | 3.5 to 4.2 quarts |
| Nissan Kicks | 4.0 to 4.5 quarts |
| Nissan Rogue | 5.0 to 5.7 quarts |