There are two fuse boxes on a 2006 Honda Accord: one in the engine bay and one inside the vehicle. The engine bay box protects engine- and powertrain-related circuits, while the interior box covers cabin electronics. This article explains their locations and general purposes, with tips to identify the exact fuses for your model.
Understanding the question helps owners anticipate where to look for blown fuses or to reference the diagrams when replacing them. In most US-spec 2006 Accords, two main fuse boxes are standard, but the exact fuse mapping can vary by trim level and options. Always consult the box covers and your owner's manual for precise fuse assignments.
Locations of the fuse boxes
There are two fuse boxes in a typical 2006 Honda Accord. The engine bay box is located in the engine compartment, and the interior box is located inside the cabin, usually behind a cover on the driver’s side dash near the knee area or behind the glove box depending on trim.
Engine compartment fuse box
Access to this box is gained by opening the hood and locating the fuse/relay box in the engine bay. The cover usually has a diagram showing fuse numbers and what they protect. This box handles fuses and relays for engine management and other powertrain circuits.
Before using this list, note that exact fuse assignments can vary by model year and trim. The diagram on the cover will confirm the specific fuses.
- Engine compartment fuse/relay box location: in the engine bay, typically toward the passenger side near the firewall.
- Common areas it powers: engine control modules, fuel system, cooling fans, alternator, and other critical powertrain circuits.
- Access tips: use the diagram on the lid to identify each fuse; handle with care to avoid damaging the cover or wiring.
In short, this box is the primary source for engine and powertrain electrical protections and relays.
Interior fuse box
The interior fuse box is located inside the cabin, usually behind a panel on the driver's side dash or near the glove box depending on the trim. The cover includes a fuse map for quick reference.
Before using this list, remember that exact locations and fuse mappings can vary by model, so always check the lid diagram and the owner's manual for your specific vehicle.
- Interior fuse box location: inside the car, typically on the driver’s side kick panel or behind the glove box cover.
- Common areas it powers: lighting, infotainment, climate controls, power windows, mirrors, and other interior electronics.
- Access tips: remove the cover to view the fuse layout; replace fuses with the same amperage rating as stamped on the fuse.
In short, this box handles most cabin electronics and convenience circuits.
How to check or replace fuses
If you need to check or replace a fuse in a 2006 Accord, follow these steps.
- Turn off the ignition and all electrical accessories before removing a fuse.
- Use the fuse diagram on the box lid to locate the correct fuse.
- Carefully remove the fuse with a fuse puller or needle-nose pliers and inspect the metal element for a break.
- If the fuse is blown, replace it with a fuse of the same amperage rating; do not exceed the rating.
- Reinstall the fuse and test the circuit to confirm proper operation.
- If fuses continue to blow, there may be an underlying short or draw; consult a professional.
Always replace fuses with the specified amperage and handle electrical components with care to avoid further damage.
Summary
In a typical 2006 Honda Accord, you can expect two fuse boxes: one in the engine bay and one inside the cabin. The engine bay box protects engine and powertrain circuits, while the interior box covers cabin electronics. Use the box lids as your map, follow manufacturer guidance, and replace fuses with the correct amperage to maintain electrical system safety and reliability.