On a 2014 Civic, the most common reset you’ll perform is for the Maintenance Minder oil-life indicator. The Tire Pressure Monitoring System (TPMS) can reset under the right conditions, and the Check Engine light should not be cleared without addressing the underlying issue.
What warning lights can be reset by the driver
The car supports resetting some lights yourself after maintenance or tire service. The following sections outline the standard procedures for the most common resettable indicators.
Maintenance Minder / Oil Life reset
Resetting the oil-life portion of the Maintenance Minder after an oil change ensures the system starts a fresh service interval.
- Turn the ignition to ON with the engine OFF.
- Navigate to Oil Life on the information display using the SEL/RESET knob to select Oil Life (Oil Life %).
- Press and hold the SEL/RESET knob until the Oil Life reads 100%.
- Turn the ignition OFF, then start the engine to confirm the Oil Life is reset to 100%.
Resetting the oil-life indicator updates the maintenance schedule and starts a new interval based on driving conditions and oil quality.
TPMS reset / tire pressure monitoring system
The TPMS light can typically be reset after tires are properly inflated or, on some trims, via a reset button. If your model supports a manual reset, use it; otherwise, the system relearns automatically after correct tire pressure is restored and you drive for a short distance.
- Ensure all tires are inflated to the recommended pressures listed on the door jamb placard.
- If your Civic has a TPMS reset button, with the ignition ON and the engine OFF, press and hold the button until the TPMS indicator blinks or a confirmation is given, then release. Drive at a moderate speed for a short distance to relearn.
- If there is no reset button, simply drive the vehicle at speeds above about 30–50 mph for 10–15 minutes; the system should relearn automatically.
The TPMS should reset once the tires are at the correct pressures and the system has relearned. If the light remains on after following these steps, there may be a faulty sensor or another tire issue requiring service.
Check Engine light (malfunction indicator)
The Check Engine light signals a fault detected by the onboard diagnostics. It should not be cleared as a routine fix; clearing codes without repairing the underlying problem can lead to further damage or emissions failures.
- Read the codes with an OBD-II scanner or have a technician diagnose the issue.
- Repair the root cause (e.g., loose gas cap, faulty sensor, ignition issue).
- After repairs, clear the codes with a scanner or allow the system to relearn if the light turns off on its own.
Bottom line: don’t rely on resetting the Check Engine light as a workaround; address the problem first.
When to seek professional service
If a warning light behaves abnormally, remains on after attempting the standard resets, or you are unsure about the cause, consult a mechanic. Persistent TPMS issues, repeated maintenance warnings, or a stubborn Check Engine light may indicate a sensor fault, a leak, or a more serious engine or emissions problem.
Summary
The 2014 Honda Civic allows driver-initiated resets for the Maintenance Minder (oil life) and, in many cases, TPMS after tire service. The Check Engine light should only be cleared after diagnosing and repairing the underlying issue. For model-specific button locations and sequences, refer to the owner’s manual or a dealership service guide.