In most Honda models, you reset the tire pressure sensor (TPMS) by performing a relearn: either drive on the highway to trigger an automatic relearn, or use the TPMS reset option in the vehicle’s settings, or a dedicated reset button if equipped. If the light stays on after trying these methods, a dealer or tire shop can perform a reprogramming or sensor replacement.
This guide outlines the two main approaches used across many Honda models, explains where to look for the reset option, and notes model-year variations. Always consult your owner's manual for the exact steps for your car.
Common methods to reset TPMS
The two broad approaches described below apply to most current Honda models, but exact steps can vary by year and trim.
- Automatic relearn by driving: Inflate tires to the correct pressures, then drive at highway speeds (about 50 mph / 80 km/h or higher) for roughly 10 minutes. The TPMS light may flash and then settle once the relearn completes.
- Manual relearn via vehicle settings or reset button: If your model supports manual relearn, use the TPMS reset option in the instrument cluster or Settings menu, or press the dedicated TPMS/reset button if equipped. Follow on-screen prompts or the dash indicator to start the relearn, then drive as directed to complete the process.
Once the relearn completes, verify by driving and monitoring the TPMS light. If the light remains on or returns after a short time, there may be a faulty sensor or wheel pressure issue requiring service.
Model-specific notes
Because procedures differ by year and trim, the exact path to trigger a TPMS relearn can vary. Some Hondas use a dash menu path such as Settings > Vehicle > TPMS > Relearn, while others rely on a physical reset button located under the dash or in the glove box. If your vehicle doesn’t respond to the above methods, consult the owner’s manual or Honda’s official support for model-specific instructions.
Keep in mind for common models
Older or lower-trim Hondas might not have a dedicated TPMS reset button and instead require the dashboard menu approach. Newer models typically provide a relearn option in the vehicle’s settings. After any tire rotation, replacement, or sensor service, a relearn is often required to re-associate the sensors with your vehicle.
When to seek professional help
If the TPMS light stays on after attempting both automatic and manual relearn methods, or you suspect a faulty sensor, defective valve stem, or leaking tire, contact a Honda dealer or a qualified tire shop. They can perform a technical relearn with specialized tools or replace faulty sensors as needed.
Summary
Resetting a Honda TPMS typically involves inflating all tires to the recommended pressures and either driving to trigger an automatic relearn or using the vehicle’s TPMS reset option in the settings (or a physical reset button if equipped). Procedures vary by model and year, so always refer to the owner’s manual for your specific car. Regularly checking tire pressures is the best preventative step to avoid TPMS alerts.