The cabin air filter on a 2022 Honda Accord Hybrid is replaced by accessing a small housing behind the glove box, swapping in a new filter, and reassembling.
This article explains where the filter lives, what tools you’ll need, and step-by-step instructions to complete the swap, along with tips to avoid common mistakes and guidance on how often to replace the filter.
What you’ll need
Gather the tools and the replacement filter before you start to ensure a smooth, clean swap.
- Replacement cabin air filter (OEM part 80292-SWA-003 or an equivalent aftermarket filter with the same size and filtration level)
- Optional activated carbon filter for extra odor control
- Flashlight or strong smartphone light
- Small flat-head screwdriver or trim tool (may help with the glove box damper or housing clips)
- Clean microfiber cloth
- Gloves to keep hands clean
With your replacement filter and tools ready, you’re prepared to begin. If you’re unsure about the exact filter model for your trim, consult your owner’s manual or Honda parts catalog before purchasing.
Where the filter lives
In the 2022 Accord Hybrid, the cabin air filter is located behind the glove box on the passenger side. Access it by lowering the glove box and removing the cover for the filter housing.
Filter orientation
Check the arrows on the filter packaging or the housing to confirm airflow direction. Align the filter so the arrows point in the same direction as the airflow through the HVAC system. If in doubt, follow the housing’s marks or the packaging arrows to ensure proper orientation.
Step-by-step replacement
Follow these steps to replace the cabin air filter on a 2022 Accord Hybrid. The glove box access is straightforward, and the process typically takes about 10-15 minutes.
- Open the glove box and remove contents to give yourself space to work.
- Gently squeeze the sides of the glove box inward to release the stops and allow the box to drop down further. If your model uses a dampener arm, disconnect or move it as needed to access the filter area.
- Locate the filter housing cover above the bottom of the glove box. Release the clips or remove the small screws securing the cover.
- Carefully pull out the old cabin air filter and note its orientation for reference.
- Wipe the housing opening with a clean microfiber cloth to remove dust or debris. Do not use water inside the housing.
- Insert the new filter into the housing in the same orientation as the old one, ensuring the airflow arrows align with the housing’s direction marks.
- Reattach the housing cover, securing clips or screws as required.
- Raise the glove box back into place, reconnect the dampener arm if you removed it, and run the HVAC system briefly to verify that air is flowing properly through the vents.
When you’re finished, replace any contents in the glove box and dispose of the old filter properly. A proper seal around the housing ensures optimal filtration and ventilation performance.
Maintenance tips and replacement schedule
Regular replacement helps maintain air quality and HVAC efficiency. Consider these guidelines and practices.
- Typical replacement interval: about every 15,000 to 25,000 miles (24,000 to 40,000 km) or once per year, whichever comes first. In dusty or high-pollen environments, you may need to change it more often.
- Signs you should replace it sooner: reduced airflow from vents, a noticeable odor when the HVAC is running, or visible dirt/debris on the old filter.
- Consider an activated carbon option if you drive in areas with strong odors, pollution, or heavy traffic.
- Always confirm the exact part number for your vehicle variant, as trim levels or production changes can affect compatibility.
By staying on top of cabin air filter maintenance, you’ll help keep interior air clean and HVAC performance at its best.
Summary
Replacing the cabin air filter on a 2022 Honda Accord Hybrid is a quick, tool-light job that takes place behind the glove box. Gather the replacement filter, a few basic tools, and a flashlight, then follow the step-by-step process to remove the old filter, install the new one with proper orientation, and reseal the housing. Adhere to recommended replacement intervals and consider activated carbon options for odor control. Regular maintenance helps maintain cabin air quality and HVAC efficiency.