To reset the tire pressure sensor on a Honda Accord, you generally inflate all tires to the recommended pressure and run a TPMS relearn. The exact method depends on the model year, with some cars using a physical reset button and others requiring a drive cycle or a menu-based calibration.
The procedure varies by year, so it’s important to check your owner’s manual or Honda’s support resources for the specific steps for your model. The guide below covers common methods and year-specific differences to help you reset the system correctly.
What TPMS is and why you might need a reset
The Tire Pressure Monitoring System (TPMS) in the Honda Accord monitors each tire’s air pressure and alerts you when a tire is underinflated. A reset or relearn is often needed after inflating tires, rotating wheels, or replacing sensors. A successful reset ensures the display reflects the correct pressures and that the system can correctly identify a low-tire condition in the future.
Steps you can take before resetting
Before attempting a reset, it’s important to ensure each tire is inflated to the recommended cold pressure and to locate the TPMS reset option or button on your specific model. The following steps are common prep actions across many Accords.
- Check all four tires (and spare, if applicable) and inflate to the recommended cold pressures shown on the door jamb placard or in the owner's manual.
- Inspect tires for damage or slow leaks, which could cause ongoing low pressures and affect the reset process.
- Find the TPMS reset button or the vehicle’s TPMS calibration option in the center display or instrument cluster, if your model uses a button or menu-based reset.
- Confirm you are performing the relearn with the ignition in the proper position (usually ON with the engine off) and following the model-year-specific prompts.
Once you’ve prepared the tires and located the appropriate reset path, you can proceed with the relearn process described in the sections below. A successful reset should illuminate or extinguish the TPMS light as appropriate and allow the system to monitor tire pressures accurately.
Year-specific reset methods
Most recent models (roughly 2020s and current generation)
For newer Honda Accords, the TPMS relearn often happens through the vehicle’s settings interface or via a simple button press, followed by a short drive to complete the calibration.
- Inflate all tires to the recommended cold pressures.
- Turn the ignition to ON (engine OFF). If your model has a TPMS button, locate it on the dash or near the steering column and press/hold until the indicator blinks or a confirmation message appears on the display.
- If your car uses the onboard menu, navigate to Settings or Vehicle, select TPMS Calibration or Learn, and choose Calibrate Now or Learn.
- During or after the calibration, drive at 40–60 mph (65–100 km/h) for about 10 minutes to complete the relearn.
- Check that the TPMS light goes out or remains steady; if it stays on, recheck tire pressures and consider consulting a dealership or tire shop to inspect sensors for leaks or faults.
In most cases, following the car’s electronic prompts and performing the drive cycle will restore proper TPMS operation on these newer models.
Older models and early-mid 2010s (roughly 2010–2019)
Older Accords may rely more on a dedicated reset button or a simple drive cycle after inflation. Availability of a button and exact steps can vary by trim level and market.
- Ensure all tires are inflated to the recommended pressures, and the tires are cold.
- Look for a TPMS reset button, often located under the left side of the dashboard, near the hood release, or in the glove box. Press and hold the button until the TPMS indicator on the dash blinks or a confirmation message is shown.
- If there is no reset button, perform a calibration via the instrument cluster/menu: go to Settings > TPMS Calibration (Learn) and select Calibrate Now, if available.
- Drive at a steady speed (usually 30–50 mph) for 10–15 minutes to complete the relearn.
- Verify the indicator behaves normally after the drive; if the light remains, inspect for sensor or valve issues or seek professional service.
Because older models vary more widely by year and trim, always consult the owner’s manual for the exact sequence and button location for your car. Professional service can help if sensors or modules are faulty.
What to do if the TPMS light won’t reset
If you’ve inflated the tires correctly and completed the relearn steps but the TPMS light remains on, it could indicate a faulty sensor, a damaged valve stem, or a slow leak in one tire. In that case, you should:
- Check tires with a portable gauge and recheck pressures after a cooldown period.
- Inspect for punctures or damaged tires and address leaks promptly.
- Have the TPMS sensors tested with diagnostic equipment at a tire shop or dealership; individual sensors can fail or lose battery power.
Addressing sensor faults or leaks promptly is important for safety and for maintaining accurate tire pressure monitoring.
Summary
Resetting the TPMS on a Honda Accord generally involves bringing all tires to the correct cold pressures and performing a relearn, which may be done with a dedicated reset button or through the vehicle’s settings. The exact steps depend on the model year and trim, so consult the owner’s manual or a Honda dealer if you’re unsure. Properly reset TPMS helps ensure accurate alerts and safer driving.
Where is the TPMS reset button on a Honda Accord?
So you're going to do it through this screen right here click your home button we're already on home go to settings. Go to vehicle. Choose your first option TPMS calibration. And then click calibrate.
Why doesn't my Accord have a tire pressure monitor reset button?
You need to replace the sensor. And the tire dealer should be able to program those to the ECU. For you for 2013 to 2016 Honda Accord owners.
How do you reset your Honda's Tire Pressure Monitoring System TPMS?
With Touchscreen
- From the Home screen, select “Settings”
- Select your vehicle.
- Select “TPMS Calibration”
- Select “Calibrate”
Why is my Honda Accord inflated tire still showing tire low pressure?
One of the most common reasons for a TPMS light staying on despite the tires being properly inflated is a sensor malfunction. TPMS sensors are typically located inside the tire and can wear out or become damaged over time, particularly if you've hit a curb, driven through a pothole, or been off-road.