The tire pressure monitoring system (TPMS) on a 2018 Honda Accord can typically be reset by inflating the tires to the manufacturer's recommended pressures and driving to relearn, or by triggering a manual calibration through the car’s TPMS settings.
In this article, we outline both the automatic relearn that occurs as you drive and the manual calibration option you can use when a reset is needed after tire changes or sensor work. The steps below cover common trims; if your interface differs, consult the owner's manual for exact menu names and options.
Two paths to reset TPMS
There are two practical approaches: letting the system relearn automatically after inflating the tires to spec by driving, or initiating a manual calibration through the vehicle’s TPMS menu to force a reset. The exact steps can vary by trim and equipment, but the general process remains consistent.
Automatic relearn by driving
Before you try this method, ensure all tires are inflated to the recommended cold pressures shown on the door jamb placard and that wheels/sensors are undamaged. The system should relearn as you drive under normal conditions.
- Inflate all four tires to the recommended cold pressures as shown on the driver’s door placard or in the owner’s manual.
- Drive at speeds above about 30 mph (50 km/h) for 10 minutes or longer. Highway driving can help ensure all sensors are read correctly.
- Continue normal driving. The TPMS light should turn off once the sensors are learned. If the light remains on, recheck tire pressures and inspect for leaks or damaged sensors.
In most cases, this automatic relearn completes without special tools and is the simplest path after inflating tires.
Manual calibration through the vehicle’s TPMS settings
This method is useful if the automatic relearn doesn’t happen after adjusting pressures, or if you recently rotated tires or changed sensors. It forces the system to re-learn through the car’s menu.
- Confirm all tires are inflated to the recommended cold pressures.
- Turn the ignition to ON (the engine may be off) and access the Driver Information Interface or center touchscreen.
- Navigate to Vehicle or Settings > TPMS Calibration (or Tire Pressure Monitoring Calibration) and select Calibrate Now (Calibrate).
- Drive at speeds above 30 mph (50 km/h) for about 10 minutes to finalize the relearn. The light should go out once calibration completes.
Manual calibration can be faster when tire work is performed or when sensors are replaced; if the light returns, there may be a faulty sensor or a coding issue that requires dealer service.
Additional considerations
Notes to keep in mind: the door placard provides the correct cold pressures for your tires; heat and load can alter optimal pressure. If you’ve replaced a wheel with a sensor, or you see irregular readings after calibration, you may need a sensor relearn with professional diagnostic tools. Some models require the engine to be running to access certain TPMS menus.
Summary
Resetting the TPMS on a 2018 Honda Accord can be done through an automatic relearn by simply inflating tires to the recommended pressures and driving, or by using the vehicle’s TPMS calibration option to manually recalibrate. If the warning light persists, verify tire pressures, inspect sensors for damage, and consult a dealership if needed.
Where is the TPMS reset button on a Honda?
If your Honda is equipped with a TPMS button, you'll find it to the left of the steering wheel.
Why doesn't my Accord have a tire pressure monitor reset button?
You need to replace the sensor. And the tire dealer should be able to program those to the ECU. For you for 2013 to 2016 Honda Accord owners.
How do I turn off the low tire sensor light on a Honda Accord?
Key. Then we reach down below to our tire pressure moni monitoring system switch. We push and hold for 3 seconds. And you'll see your light has gone out and the system is in the recalibration mode.
Where is the TPMS reset button on a 2018 Honda Accord?
So you're going to do it through this screen right here click your home button we're already on home go to settings. Go to vehicle. Choose your first option TPMS calibration. And then click calibrate.