To reset Honda oil life, turn the ignition to ON with the engine off, access the Oil Life or Maintenance Minder screen on the driver information display, and press and hold the SEL/RESET button on the steering wheel for about 5 seconds until the Oil Life reads 100%.
Oil life is part of Honda's Maintenance Minder system that tracks when service is due based on driving conditions. Resetting it after an oil change updates the maintenance interval so alerts stay accurate. Steps can vary by model year and by whether your car uses a digital instrument cluster or a center display. If your model looks different, consult your owner’s manual for model-specific instructions.
Understanding Honda Oil Life and Maintenance Minder
Oil Life represents the remaining useful life of your engine oil. As you drive, the system calculates when the oil should be changed and prompts maintenance accordingly. After you perform an oil change, resetting Oil Life restarts the countdown so your next service date reflects the fresh oil.
Reset procedure for newer Honda models (2018–present)
These steps cover most newer Hondas that use the driver information display and the SEL/RESET button on the steering wheel. If your vehicle’s interface differs, adapt accordingly.
- Turn the ignition to ON with the engine OFF.
- Use the steering wheel controls to access the driver information display, then navigate to Maintenance Minder or Oil Life.
- Highlight Oil Life and press and hold the SEL/RESET button for about 5 seconds until the display resets to 100% (some models may blink or show a brief confirmation).
- Turn the ignition off, then start the engine to verify that Oil Life now shows 100% and the next service interval is updated.
After performing these steps, your Honda's Maintenance Minder will begin a new oil-life countdown based on your driving conditions and the oil type you use.
Troubleshooting: If the reset won’t complete
If the Oil Life does not reset, try these tips: ensure the ignition is in ON (not START), keep holding the reset button for longer (up to 10 seconds in some models), or cycle the ignition OFF and ON again and retry. In some trims, you may need to use the "Enter" or "Reset" button on the instrument panel rather than the steering wheel control. If it still won't reset, consult your owner's manual or contact a Honda dealer.
Reset procedure for older Honda models (pre-2018)
Many older Hondas with Maintenance Minder use the Vehicle Information or Maintenance screen accessed via the dash buttons. The reset action is similar but may use a different button layout.
- Turn the ignition to ON with the engine OFF.
- Access the Maintenance Minder or Vehicle Information menu on the instrument display using the dash or wheel controls.
- Scroll to Oil Life, then select Reset (often by pressing and holding the Enter/Reset button or a dedicated Reset control) until the Oil Life reads 100%.
- Turn the ignition off, then start the engine to confirm the reset.
In many older models, resetting Oil Life sets the oil maintenance interval to start anew after an oil change and helps ensure reminders align with the new oil service.
After completing the older-model steps, the Oil Life should reflect a fresh 100% and the Maintenance Minder will schedule future service accordingly.
Additional tips for a smooth reset
- Make sure you’ve actually completed an oil change before resetting. Resetting without changing the oil can mislead the maintenance schedule.
- If you have a multicolor maintenance light, verify it returns to a normal display after the reset.
- If your vehicle has other reminders (brake, tires, etc.), reset those only after corresponding services have been performed.
Summary
Resetting your Honda’s Oil Life keeps the maintenance reminders accurate after an oil change. For most modern Hondas, access the Oil Life screen on the driver information display and hold the reset button until it reads 100%. On older models, use the Maintenance Minder or Vehicle Information menu to reset Oil Life. If you encounter difficulties, consult your owner's manual or contact a Honda dealer for model-specific instructions.
How to reset oil life on a Honda?
And eventually it will reset there we go. And that is now changed. And if you see here oil life is at 100%. So job done nice and simple. And again if we turn the car on.
How to reset 2015 Honda oil light?
Stage. Press the button on the right until the display shows oil life press and hold the button until the display starts flashing. Then release it then hold the button.
How to reset oil light on a 2020 Honda?
With go down the maintenance. And press the toggle in to enter. After going in the first thing that pops up is the oil life percentage A17.
How to reset the oil life on a 2016 Honda Accord?
And then once you get to it you hold it down for a few seconds. It's going to start blinking. And then you hold down the knob. Again. And that's it that's set to 100%.