Inflate all tires to the recommended cold pressures and drive at highway speeds to allow the TPMS to relearn. If the warning persists, reset the TPMS through your Honda’s settings (if available) or have the system checked for faulty sensors or leaks.
What the TPMS does and when a reset is needed
The Tire Pressure Monitoring System (TPMS) warns you when a tire’s air pressure falls below the recommended level or when a sensor reads abnormally. The light can come on after a tire rotation, seasonal changes, or if a tire has slowly leaked. In many Honda models, a successful reset requires appropriate tire pressures and a relearn of the sensor data; some cars do this automatically after driving at highway speeds, others require a manual reset in the settings.
Quick, generic steps to clear the TPMS warning
Use these steps to clear the warning on most newer Honda vehicles. They cover the basics from verifying pressures to a calibration reset if your model supports it.
- Check all tires (including the spare, if your model has a sensor) and adjust pressures to the number shown on the door jamb placard for cold tires.
- Recheck with a gauge to confirm accuracy; adjust as needed.
- Drive at highway speeds (roughly 50 mph or more) for 10–20 minutes to allow the system to relearn the new pressures.
- If your model supports it, perform a TPMS calibration reset in the vehicle’s settings: Settings > Vehicle > TPMS Calibration > Reset. Some cars may use a dedicated TPMS or reset button; consult your owner’s manual for the exact path.
With the tires correctly inflated and the vehicle driven, the TPMS light should go out within a short time. If it remains on, do not assume the problem is solved; there may be a faulty sensor or persistent leak.
Model-specific reset options
Honda and its dealers publish model-specific steps. The following are common approaches found in many 2016–2024 Honda models, but check your owner’s manual for exact steps for your year and trim.
- Honda Civic (2016–2024): Use the central display to navigate to Settings > Vehicle > TPMS Calibration > Reset, then drive at highway speeds for 10–20 minutes to relearn.
- Honda Accord (2018–2024): Settings > Vehicle > TPMS Calibration > Reset; drive on the highway to complete the relearn.
- Honda CR-V (2017–2024): Settings > Vehicle > TPMS Calibration > Reset (if available); otherwise, drive with correct pressures and the system will relearn automatically.
- Other models (Pilot, HR-V, Ridgeline, etc.): A similar calibration option may appear under Settings > Vehicle > TPMS Calibration; if not present, rely on automatic relearn after driving with proper pressures.
If your vehicle lacks a TPMS Calibration option in the menu, the system is likely designed to relearn automatically after you drive with the correct tire pressures for a period of time. If the light persists after ensuring all tires are correctly inflated and driving, seek professional assistance to check for leaks, sensor faults, or a need for a sensor replacement.
What to do if the TPMS light won’t reset
Persistent or stuck TPMS warnings require further investigation. You should check for slow leaks, damaged sensors, or a failed valve stem seal. If a tire is still underinflated after inflating, or if a sensor failure is suspected, it’s best to visit a dealership or tire shop for diagnosis and possible sensor replacement. Many tire shops can perform a TPMS relearn and verify sensor health with specialized tools.
Summary
To clear a Honda TPMS warning, start by inflating all tires to the recommended cold pressures, then drive to allow a relearn. If your model supports it, use the TPMS Calibration Reset in Settings and follow the on-screen prompts. If the light remains on after proper inflation and driving, seek professional assistance to check for leaks, sensor faults, or a need for a sensor replacement. Regularly checking tire pressures can prevent TPMS alerts and extend tire life.