Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

How do I change the wiper blades on a 2016 Honda Fit?

Front wiper blades on a 2016 Honda Fit can be replaced in about 10 to 15 minutes using 26-inch driver-side and 16-inch passenger-side blades, and the rear blade is typically 11 inches. No special tools are required.


Regular wiper blade maintenance is essential for clear visibility, especially in rain or snow. This guide explains how to replace the front blades on a 2016 Honda Fit, followed by the rear blade, with practical tips to ensure a secure fit and proper operation.


What you’ll need


Before you start, gather the blades and tools that fit your Fit. The following list covers the typical sizes and common accessories.



  • Front wiper blades: 26 inches (driver side) and 16 inches (passenger side)

  • Rear wiper blade: about 11 inches

  • Replacement blades with the correct adapters (most modern blades come with multiple adapters)

  • Lint-free cloth or microfiber towel for wiping the arms and blades

  • Optional: a small flat-head screwdriver to release stubborn adapters


Having the right blades on hand helps speed the job and reduces the chance of a poor fit or streaking on the glass.


Front wiper blades: replacement steps


Follow these steps to swap the front blades on the 2016 Honda Fit. Ensure the engine is off and the wipers are at the parked position before starting.



  1. Lift the entire wiper arm away from the windshield until it stays upright and away from the glass.

  2. On the blade’s connector, locate the release tab or button and press to release the blade from the arm. Slide the blade downward or away from the hook until it comes free.

  3. Detach the old blade from the arm and set it aside.

  4. Prepare the replacement blade by selecting the correct adapter. Attach the blade’s connector to the arm’s hook and align it with the mounting point.

  5. Slide the new blade onto the arm until you hear or feel a click, indicating it’s securely locked in place.

  6. Lower the wiper arm back onto the windshield and gently test the motion to verify a clean sweep without interference.


With the front blades secured, wipe the windshield to confirm a streak-free sweep and recheck that the blades are fully seated.


Rear wiper blade replacement


The 2016 Honda Fit’s rear wiper blade is typically around 11 inches. Follow these steps to replace it.



  1. Open the hatch or gently lift the rear wiper arm away from the rear window until it stays in a raised position.

  2. Find the release mechanism on the rear blade’s connector, usually a small tab or latch. Press or slide it to release the blade from the arm.

  3. Remove the old blade from the retaining frame and discard it.

  4. Attach the new blade by sliding or snapping it into place in the same orientation as the old blade.

  5. Slowly return the rear wiper arm to the window and test the wiper to ensure full coverage and no stuttering.


Ensure the new rear blade sits firmly in its frame and clears the glass evenly during a test run.


Care and maintenance tips


To maximize lifespan, replace wiper blades at least once a year or sooner if you notice streaking, skipping, or chattering. Clean the blades and windshield regularly, and avoid parking with the blade edge facing direct sunlight for extended periods, which can cause the rubber to harden.


Summary


Replacing the wiper blades on a 2016 Honda Fit is a routine, no-tools-needed task that can be completed in a short afternoon. Use 26" and 16" blades for the front, 11" for the rear, and ensure proper installation for a clear, streak-free view in rain and snow.

What size wipers for 2016 Honda Fit?


Once you find the style you like, make sure you get a 28-inch blade for the driver's side and a 13 or 14-inch blade for the passenger's side. When you need the best 2016 Honda Fit wiper blades make sure you shop with AutoZone for the best deals, parts, and unmatched convenience.
Ask More



Can I remove wiper arms without a special tool?


I often remove wiper arms using a wrench, when I haven't got any locking pliers around.
Ask More



How to remove wipers from Honda Fit?


Hi guys today we'll show you how to replace windshield wipers first lift the wiper. The next step you have to locate the latch right here press and push it down. So you have to press to release.



What year to stay away from Honda Fit?


With the most reported complaints of all model years of the Honda Fit, the 2015 Fit is one we definitely recommend avoiding if you are looking to purchase from the last generation of this model. These early models tend to carry more issues that would be rectified later in the car's production life.
Ask More


Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.