How do I add a phone to my Honda Fit?

To add a phone to your Honda Fit, pair it over Bluetooth through the car's infotainment system. If your model supports Apple CarPlay or Android Auto, you can also connect via USB (and sometimes wirelessly) for a richer hands-free experience.

Bluetooth pairing: a quick, wireless connection

What you’ll need

Make sure your phone’s Bluetooth is turned on and set to discoverable, and that the Fit’s Bluetooth system is ready to pair.

1. On your phone, enable Bluetooth and set the device to discoverable.


2. In the Fit’s infotainment system, press the Phone or Settings button and select Bluetooth or Pair New Device.


3. From the car screen or your phone, choose the car’s Bluetooth name (such as “Honda Display” or “HFL”).


4. Confirm any pairing code that appears on both screens; accept prompts to share contacts and messages if you want them in-car.


5. Finish pairing and, if prompted, set the device as the preferred phone for auto-connecting in the future.

Once paired, the system will reconnect automatically on subsequent starts, and you can use the car’s display or steering-wheel controls for hands-free calls and voice commands.

Using Apple CarPlay or Android Auto (if your trim supports it)

CarPlay/Android Auto compatibility

Some Honda Fits support Apple CarPlay or Android Auto, typically via USB. In newer trims, wireless CarPlay may be available. Check your owner’s manual or Honda’s official specs for your exact year and trim.

1. Verify compatibility for your specific model year and trim.


2. Connect your phone to the car using the recommended method (usually a USB cable to the designated port).


3. On the infotainment screen, select CarPlay or Android Auto when prompted.


4. On your phone, grant any required permissions (CarPlay: allow CarPlay while locked; Android Auto: grant necessary permissions).


5. Follow on-screen prompts to complete setup; you can now use apps, navigation, calls, and messages through the car’s display.

If CarPlay/Android Auto does not appear, ensure the software is up to date, you’re using a supported cable, and that you’ve granted the necessary permissions on your phone.

Troubleshooting and tips

Common issues and fixes

These quick checks help resolve most connection problems when adding a phone or using CarPlay/Android Auto.

• Ensure both devices are in pairing mode and within close range. Turn Bluetooth off and back on if needed.


• If pairing fails, remove the car from your phone’s Bluetooth list and try again; on the car, delete the old device before adding a new one.


• If a PIN or passkey is requested, confirm that the same code appears on both screens and accept it on both sides.


• If calls or audio don’t route through the car, confirm Bluetooth is selected as the preferred device on your phone and in the car’s Bluetooth settings.


• For CarPlay/Android Auto, verify permissions on the phone and try a different USB cable or port if the connection is unstable.

If issues persist, refer to the owner’s manual for model-specific steps or contact a Honda service center for assistance.

Summary

Connecting a phone to a Honda Fit generally involves pairing via Bluetooth for hands-free calling and audio. If your model supports it, you can also use Apple CarPlay or Android Auto through USB (and sometimes wirelessly) to access apps, navigation, and messages on the car’s display. Following the steps above should get you up and running quickly, with smooth, safer hands-free use on the road.