Yes—the Dodge Dart uses a cabin air filter to improve the air quality inside the cabin, and it is located behind the glove box on most 2013–2016 Darts.
What the cabin air filter does
The cabin air filter screens outside air for the HVAC system, trapping dust, pollen, and other particulate matter before air is blown into the cabin. Replacing a dirty filter helps maintain interior air quality, reduces odors, and can improve the efficiency of the blower fan over time.
Presence and location in the Dodge Dart
Accessing the filter in typical Dart models
In the Dart, the cabin air filter is part of the HVAC system and is typically located behind the glove box. Access usually involves lowering or removing the glove box to reach a rectangular housing. Some trims or years may use a slightly different access path, such as a small panel in the passenger footwell. Always consult the owner's manual or a service guide for your exact year and trim.
To guide you through replacing or inspecting the cabin air filter, use the steps below. They apply to most 2013–2016 Darts, though there can be year-to-year differences.
- Empty the glove box and gently release the glove box stops or dampening arm so the door can drop down.
- Locate and remove the filter housing cover; this is usually a rectangular panel inside or just behind the glove box.
- Remove the old cabin air filter and note the correct orientation (the arrow on the filter should point in the direction of airflow into the HVAC system).
- Clean any debris from the housing and insert the new filter, ensuring it seats firmly and the orientation is correct.
- Reattach the housing cover, lift the glove box back into place, and re-engage the stops or dampening mechanism.
- Close the glove box and run the HVAC on a few minutes to verify smooth airflow.
After replacing the filter, ensure everything is securely reassembled and the airflow feels normal. If you don’t see a filter housing behind the glove box, consult the owner’s manual or a dealership technician for guidance specific to your vehicle’s year and trim.
Maintenance tips and replacement interval
As a general guideline, replace the cabin air filter every 12,000–15,000 miles (about 19,000–24,000 km) or at least once a year. In dusty, polluted, or high-pollen environments, replacements may be needed more frequently. Signs that the filter may need attention include reduced airflow, musty odors, or increased allergy symptoms inside the cabin.
Model-year variations
Across 2013–2016 Dodge Dart models, the cabin air filter is a standard part of the HVAC system, but the exact housing location and access method can vary slightly by year and trim. If you’re unsure, check the owner's manual or a certified service guide for your specific VIN/year to confirm access steps and replacement intervals.
Summary
In short, the Dodge Dart does have a cabin air filter. It is typically hidden behind the glove box and can be replaced with a straightforward procedure outlined above. Regular replacement helps maintain cabin air quality and HVAC efficiency, especially for drivers in areas with higher dust or pollen levels.