Does a 2010 Honda Civic have drum brakes?

The brake setup on a 2010 Honda Civic varies by trim. Most non-Si Civics use front disc brakes with rear drum brakes, while the Civic Si uses disc brakes on all four wheels. The Hybrid version typically follows the rear drum configuration as well. Always verify your specific vehicle’s braking system with the owner's manual or a VIN check.

Brake system overview for the 2010 Civic

Brake design differed across the 2010 Civic lineup in the United States. Here is a practical breakdown to help buyers and owners identify their setup, especially when buying used or planning maintenance.

Brake configurations by trim

The following configurations were common for US-market 2010 Civics. Regional variations can occur, and special editions may differ.

• DX/LX/EX/EX-L (non-Si, non-Hybrid): Front discs, rear drums


• Si: Front discs, rear discs


• Hybrid: Front discs, rear drums

Note: If you're unsure, check the brake types on the rotors/shoes or consult the owner's manual or dealer for your exact VIN.

Maintenance and safety considerations

Regular brake inspections are essential for safety and performance. The following guidance helps outline what to check and when to seek service for a 2010 Civic.

What to inspect during maintenance

• Front brake discs: thickness, wear, scoring, and warping


• Front brake pads: material thickness and even wear


• Rear brakes: drum shoes or disc pads, surface condition, and overall wear


• Brake lines and hoses: look for leaks, cracks, and swelling


• Brake fluid: level and condition; replace if contaminated or low

Regular inspections help identify wear before it affects braking performance and ensures safe operation of the vehicle.

Why this matters for buyers and owners

Understanding whether a 2010 Civic uses drums or discs influences maintenance costs, replacement parts, and brake performance expectations. Disc brakes generally provide stronger, cooler performance and easier servicing on the Si, while rear drum brakes on other trims are common and require periodic adjustment and inspection.

Summary

In summary, the 2010 Honda Civic’s brake configuration depends on the trim: front discs are standard across the lineup, rear brakes are typically drums on most non-Si trims, and discs on the Si. The Hybrid commonly follows the non-Si rear drum setup. Always confirm your exact model's brake arrangement via VIN lookup or the owner's manual.

What are the common problems with a 2010 Honda Civic?

Owner Reported Trouble Spots

• Paint/Trim. Paint (fading, chalking, peeling, or cracking), loose interior or exterior trim or moldings, rust.
• Climate System.
• Exhaust.
• Fuel System/Emissions.
• Body Hardware.
• Noises/Leaks.
• Engine Electrical.
• Electrical Accessories.

What year did they stop putting drum brakes on cars?

In the United States, the Jeep CJ-5 (manufactured by AM General) was the final automobile (produced for the United States Postal Service) to use front drum brakes when it was phased out in 1986. However, drum brakes are still often used on the rear wheels, and for parking brakes.

Do Honda Civics have rear drum brakes?

So this particular drum brakes uh they just retain a lot of brake dust. And it can get a little messy and dirty a lot of little springs little parts.

What kind of brakes does a 2010 Honda Civic have?

2010 Honda Civic Sedan Specifications and Features