Yes. Depending on your trim, you can start a 2016 Dodge Journey with a traditional ignition key, or with a keyless Start/Stop system using the fob. Some models also offer remote start if equipped. The exact method varies by configuration and options.
Ignition options on the 2016 Dodge Journey
Here are the common starting methods you might encounter on a 2016 Dodge Journey. Availability depends on trim level and optional equipment; check your owner’s manual or with a dealer if you’re unsure which system your vehicle uses.
Starting with a traditional keyed ignition
Use this method if your Journey has a physical ignition key cylinder. The steps are straightforward and do not require the key fob to be recognized by a push-button system.
- Park the vehicle and set the transmission to Park (automatic) or Neutral (manual).
- Insert the key fully into the ignition and turn it to the Start position. Hold briefly until the engine cranks.
- Release the key once the engine is running and allow the vehicle to move into the RUN position. If the engine fails to start after a few seconds, stop, wait a moment, and try again.
- After starting, keep the key in the Run position as you drive, or return to the On/RUN position if your model requires it.
If the ignition lock is stiff or the steering wheel is locked, gently move the wheel while turning the key. For a stubborn key cylinder, avoid forcing it and seek service if needed.
Starting with a push-button Start (Keyless Enter ’n Go)
On Journeys equipped with Keyless Enter ’n Go, you start the engine by pressing the Start/Stop button while the key fob is inside the vehicle and the brake is pressed. This method does not require inserting a physical key into an ignition.
- Ensure the key fob is inside the vehicle interior. Some systems require the fob to be detected inside the cabin.
- Depress the brake pedal firmly.
- Press the Start/Stop button once to start the engine. If the engine does not start, verify the fob battery and that the system recognizes the fob.
If the engine doesn’t start after a couple of attempts, you may need to replace the fob battery or check the Keyless Enter ’n Go system for faults. If problems persist, consult a dealer.
Remote start, if equipped
Some 2016 Journey models include factory remote start capability. This allows you to start the engine from outside the vehicle to warm or cool the cabin before you enter.
- Make sure the vehicle is locked and that remote start is installed and activated according to the owner’s manual.
- Use the remote start sequence on the key fob (commonly pressing the Lock button, then holding the remote start button for a few seconds). The engine will start and run for a set period.
- To drive away, unlock the doors, enter, depress the brake, and press the Start/Stop button (or turn the ignition, per your model) to drive normally.
Note that remote start may not work if the key fob battery is dead, if safety systems detect an issue (hood open, doors not properly closed, etc.), or if your vehicle is not equipped with remote start.
Troubleshooting and safety tips
If your Journey won’t start with any method, check common issues such as the key fob battery, the car battery, ignition system, immobilizer, and fuses. If the engine cranks but doesn’t catch, there may be fuel delivery or ignition problems requiring professional service.
Summary
In short, a 2016 Dodge Journey can be started with a physical key if your model uses a traditional ignition, and with a Start/Stop button if it has a keyless system. Remote start is possible on models equipped for it. Because features vary by trim and options, always consult your manual or a dealer to confirm the exact starting method for your vehicle and follow safety guidelines when starting in confined spaces or with aftermarket remotes.
Does the 2016 Dodge Journey have remote start?
The base package provides you with the ability to remote start by pressing lock 3 times on your existing factory remote, eliminating any need to carry an additional remote. The range from where you can remote start is the distance where you can lock your vehicle from.
Ask More
How to start 2016 Dodge Journey with key?
And then hit the run on the key fob. So that's how you would start your um your 2016 Dodge journey if the key fob battery is dead. Thanks for watching Mechanic where you can be the mechanic.
Can you use a key to start a Dodge Journey?
Button up against the start button you put your foot on the pedal. And you use the key fob to push the start button. And voila as you can see the car is started now.
Is there a way to start a keyless car with the key?
And in doing. So. The vehicle will then start at that point you can get to your closest dealer get the battery. Replaced. Um that's something that we do here for our customers.